1072544 Phoenix Contact Electrical Connectors

1072544 Product Details

• Diameter housing
  19 mm
• External cable diameter
  4 mm ... 8 mm
• Rated current at 40°C
  4 A (2 A when using 0.14 mm² conductors)
• Color handle area
  black
• Status display
  No
• Conductor cross section AWG
  26 ... 18 (without ferrule)
• Flammability rating according to UL 94
  V0
• Contact surface material
  Ni/Au
• Sealing material
  NBR
• Length
  51 mm
• Degree of protection
  IP65
• Rated voltage
  48 V AC
• Signal type/category
  CANopen®
• Conductor cross section
  0.14 mm² ... 0.75 mm² (without ferrule)
• Assembly instructions
  The connector pin assignment can be rotated 45° to the cable outlet
• Contact carrier material
  PA 6.6
• ECLASS 9.0
  27440102
• Insertion/withdrawal cycles
  ≥ 100
• Material, knurls
  Plastic
• ECLASS 11.0
  27440102
Stripping length of the individual wire
7 mm
Note
NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
Coding
A - standard
Standards/regulations
M12 connector IEC 61076-2-101
Overvoltage category
II
Torque
0.4 Nm (M12 knurl)
Material of grip body
PA 6.6
Standards/specifications
M12 connector IEC 61076-2-101
Stripping length of the sheath
31 mm
Ambient temperature (operation)
-40 °C ... 85 °C (Plug / socket)
Number of positions
5
Insulation resistance
≥ 100 MΩ
Degree of pollution
3
Connection method
Push-in connection
Contact material
CuSn
ECLASS 10.0.1
27440102

Product condition