1052464 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:1052464
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Temperature transducer, converts signals from resistance temperature detectors and resistors into analog 0/4 - 20 mA signals. Freely programmable, Push-in connection, SIL, 3-way electrical isolation, order configuration.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1052464 Phoenix Contact price in the box on the right side or send a quick quote.
1052464 Product Details
- Height 116 mm
- Degree of protection IP20
- Rated insulation voltage 300 Vrms
- Input signal range 0 Ω ... 50 kΩ
- Configurable/programmable Yes
- Current output signal 0 mA ... 20 mA
- Max. current output signal ≥ 21 mA
- Power dissipation ≤ 0.76 W
- Conductor cross section flexible 0.2 mm² ... 1.5 mm²
- Temperature coefficient, typical 0.01 %/K
- Alignment zero ± 5 %
- Housing material PA 6.6-FR
- Designation Safety Integrity Level (SIL, IEC 61508)
- Depth 114.5 mm
- Ambient temperature (operation) 49 °C
- Test voltage 2.5 kV AC (50 Hz, 1 min.)
- Temperature measuring range -200 °C ... 850 °C (Range depending on the sensor type)
- Sensor input current 10 µA ... 210 µA (Up to 2x 210 µA with 3-conductor technology)
- Width 12.5 mm
- Ambient temperature (storage/transport) -40 °C ... 80 °C
- Altitude ≤ 5000 m
- Potentiometer resistance range 0 Ω ... 50 kΩ
- Signal output Current output
- Load/output load current output ≤ 600 Ω
- Supply voltage range 19.2 V DC ... 30 V DC (24 V DC -20%...+25%)
- Power consumption ≤ 1 W
- Conductor cross section AWG 24 ... 16
- Step response (0–99%) typ. 1 s
- Electromagnetic compatibility Conformance with EMC directive
- Insulation Safe isolation in accordance with IEC/EN 61010-1
- Degree of pollution 2
- ATEX II 3 G Ex ec ic IIC T4 Gc
- DNV GL-Vibration A
- Temperature B
- REACh SVHC Lead 7439-92-1
- ECLASS 4.1 27210120
- ECLASS 6.0 27210120
- ETIM 2.0 EC001446
- ETIM 6.0 EC002919
- ETIM 7.0 EC002919
- UNSPSC 19.0 41112105
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Sensor types (RTD) that can be used Pt, Ni, Cu sensors: 2, 3, 4-wire
- Max. permissible overall conductor resistance 50 Ω (Per cable)
- Measuring range span ≥ 50 K
- Behavior in the event of a sensor error As per NE 43 or can be freely defined
- Connection method Push-in connection
- Conductor cross section solid 0.2 mm² ... 1.5 mm²
- Transmission error, typical 0.1 % (e.g. for Pt 100, 300 K span, 4 ... 20 mA)
- Status display Green LED (supply voltage, PWR)
- Color gray
- Noise emission EN 61000-6-4
- DNV GL-Temperature B
- DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
- EMC B
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.0 27210120
- ECLASS 7.0 27210120
- ETIM 3.0 EC001446
- UNSPSC 6.01 30211506
- UNSPSC 13.2 41112105
- UNSPSC 20.0 41112105
- Output ripple (current) < 15 µAPP
- Nominal supply voltage 24 V DC
- Stripping length 8 mm
- No. of channels 1
- Alignment span ± 5 %
- Interference emission EN 61000-6-4
- Overvoltage category II
- Conformance CE-compliant, additionally EN 61326
- IECEx Ex ec ic IIC T4 Gc
- DNV GL-EMC B
- Certificate DNV GL TAA00000AG
- Vibration A
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 5.0 27210120
- ECLASS 5.1 27210120
- UNSPSC 7.0901 39121008
- UNSPSC 18.0 41112105
- UNSPSC 21.0 41112105
- Electrical isolation 375 V (Peak value in accordance with IEC/EN 60079-11)
- Standards/regulations GB 3836.1
- Typical deviation from the measuring range final value 1 %
- DNV GL-Humidity B
- Identification 2
- Additional text and EN 61326
- Humidity B
- ECLASS 10.0.1 27210129
- ECLASS 11.0 27210129
- ECLASS 9.0 27210129
- ETIM 4.0 EC001446
- UNSPSC 11 39121008
- UNSPSC 12.01 39121008
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
1052464
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨