1046617 Phoenix Contact Terminal Blocks

1046617 Product Details

• Potentials
  1
• Rated surge voltage
  6 kV
• Degree of pollution
  3
• Number of levels
  1
• Insulating material
  PA
• Maximum total current
  26 A
• Surge voltage test setpoint
  7.3 kV
• Result of flexion and pull-out test
  Test passed
• Conductor cross section tensile test
  2.5 mm²
• Result of tight fit on support
  Test passed
• Result of temperature-rise test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock form
  Half-sine
• Color
  violet
• Flammability rating according to UL 94
  V0
• Nominal voltage UN
  450 V
• Maximum load current
  22 A
• Result of surge voltage test
  Test passed
• Power frequency withstand voltage setpoint
  1.89 kV
Tractive force setpoint
50 N
Short-time current
0.3 kA
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Width
8.3 mm
Height
17.7 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
1.5 mm²
Internal cylindrical gage
A1 / B1
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
ECLASS 4.0
27141121
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 19.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Nominal cross section
1.5 mm²
Overvoltage category
III
Nominal current IN
17.5 A
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Setpoint
1 N
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
21.6 mm
Conductor cross section solid max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Insulating material group
I
Maximum power dissipation for nominal condition
0.56 W
Finger protection
guaranteed
Bending test turns
135
Tight fit on carrier
NS 35/NS 15
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock test result
Test passed
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141121
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Open side panel
No
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test directions
X-, Y- and Z-axis (pos. and neg.)
Acceleration
30g
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible min.
0.14 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section AWG max.
14
ECLASS 10.0.1
27141120
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141120
UNSPSC 7.0901
39121410
ETIM 6.0
EC000897
Conductor cross section short circuit testing
2.5 mm²
Number of connections
4
Result of voltage-drop test
Test passed

Product condition