1046615 Phoenix Contact Terminal Blocks

1046615 Product Details

• Number of levels
  1
• Color
  white
• Insulating material group
  I
• Nominal current IN
  17.5 A
• Surge voltage test setpoint
  7.3 kV
• Bending test turns
  135
• Result of tight fit on support
  Test passed
• Result of voltage-drop test
  Test passed
• Result of aging test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock form
  Half-sine
• Potentials
  1
• Insulating material
  PA
• Degree of pollution
  3
• Nominal voltage UN
  450 V
• Open side panel
  No
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Conductor cross section tensile test
  2.5 mm²
• Tight fit on carrier
  NS 35/NS 15
Ageing test for screwless modular terminal block temperature cycles
192
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Conductor cross section solid max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 26 14
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Nominal cross section
1.5 mm²
Overvoltage category
III
Maximum load current
22 A
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
8.3 mm
Connection in acc. with standard
IEC 60998-2-2
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A1 / B1
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.56 W
Finger protection
guaranteed
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Tractive force setpoint
50 N
Conductor cross section short circuit testing
2.5 mm²
Result of temperature-rise test
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection method
Push-in connection
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
12
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
ETIM 6.0
EC000897
Number of connections
4
Rated surge voltage
6 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Maximum total current
26 A
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Setpoint
1 N
Short-time current
0.3 kA
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Static insulating material application in cold
-60 °C
Length
21.6 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 4.0
27141121
ECLASS 7.0
27141120
UNSPSC 20.0
39121410
UNSPSC 18.0
39121410
UNSPSC 12.01
39121410
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
17.7 mm
Conductor cross section AWG max.
14
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141121
ECLASS 9.0
27141120
UNSPSC 13.2
39121410

Product condition