1046965 Phoenix Contact Terminal Blocks
Part#:1046965
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 17
May 2, 2024
About the product: Distribution block, Basic terminal block with supply, nominal current: 41 A, connection method: Push-in connection, Push-in connection, number of connections: 13, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 31.4 mm, height: 17.7 mm, color: green,
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1046965 Phoenix Contact price in the box on the right side or send a quick quote.
1046965 Product Details
- Number of levels 1
- Maximum total current 32 A
- Open side panel No
- Nominal cross section feed-in 4 mm²
- Flammability rating according to UL 94 V0
- Overvoltage category III
- Oscillation, broadband noise test result Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- Test duration per axis 5 h
- Number of shocks per direction 3
- Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg
- Surface flammability NFPA 130 (ASTM E 162) passed
- Conductor cross section solid max. 2.5 mm²
- Conductor cross section AWG max. 14
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ETIM 6.0 EC000897
- Color green
- Rated surge voltage 6 kV
- Nominal current IN 17.5 A
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Shock duration 18 ms
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Height 17.7 mm
- Stripping length 8 mm ... 10 mm
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²
- Internal cylindrical gage A3
- Connection cross sections directly pluggable 0.34 mm² 2.5 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 9.0 27141120
- Number of connections 13
- Insulating material group I
- Degree of pollution 3
- Nominal voltage UN 450 V
- ASD level 6.12 (m/s2)2/Hz
- Acceleration 30g
- Shock form Half-sine
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Length 21.6 mm
- Conductor cross section AWG min. 26
- Min. AWG conductor cross section, flexible 26
- Conductor cross section flexible min. 0.14 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 11.0 27141120
- Nominal cross section 1.5 mm²
- Insulating material PA
- Maximum load current 22 A (with a 2.5 mm² conductor cross section)
- Result of thermal test Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Shock test result Test passed
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Connection Pick-off level
- Connection in acc. with standard IEC 60998-2-2
- Conductor cross section flexible max. 1.5 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm²
- Value 0.34 mm²
- Ambient temperature (actuation) -5 °C ... 70 °C
- Test spectrum Service life test category 2, bogie-mounted
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2018-05
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Width 31.4 mm
- Connection method Push-in connection
- Conductor cross section solid min. 0.34 mm²
- Max. AWG conductor cross section, flexible 14
- Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm²
- ECLASS 10.0.1 27141120
- ETIM 7.0 EC000897
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
This item can ship within 24h!
1-year warranty
$6.45
1046965
Stock:
17
Select Qty:
$6.45
$6.45 each
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨