1046800 Phoenix Contact DC/DC Converters

1046800 Product Details

• Typical current consumption
  6.9 A (24 V DC)
• Inrush current integral (I2t)
  < 0.05 A2s
• Production test B
  2 kV DC
• Connection method
  Screw connection
• Conductor cross section flexible
  0.2 mm² ... 1.5 mm²
• Dynamic Boost (IDyn.Boost)
  10 A (5 s)
• Selective Fuse Breaking (ISFB)
  30 A (15 ms)
• Feedback voltage resistance
  ≤ 35 V DC
• UIn
  > 0.8 x UInNom (LED off)
• Default
  Output power ON (>40 kΩ/24 V DC/open bridge between REM and SGnd)
• Output current
  5 A
• Inflammability class in acc. with UL 94 (housing / terminal blocks)
  V0
• Height
  130 mm
• Electric strength, max.
  35 V DC (60 s)
• Typical response time
  300 ms (from SLEEP MODE)
• Input fuse
  15 A (slow-blow, internal)
• Production test D
  0.5 kV DC
• Input voltage range
  18 V DC ... 32 V DC
• Switch-on time
  < 1 s
• Type test (IEC/EN 60950-1) A
  2 kV DC
Type test (IEC/EN 60950-1) D
0.5 kV DC
Production test C
0.5 kV DC
Nominal output voltage (UN)
24 V DC
Magnetic circuit breaker tripping
A1 ... A4 / B2 / C1 ... C2 / Z1 ... Z4
System deviation, dynamic
< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz)
System deviation, input voltage change
< 0.1 % (change in input voltage ±10 %)
Rise time
< 1 s (UOUT (10 % ... 90 %))
POut
> 100 % (LED lights up yellow, output power > 120 W)
Signal option
Output current
Reference potential
to OUT1, OUT2, REM
Voltage
1 kV
Main converter stage
50 kHz ... 420 kHz (Main converter stage)
Depth
125 mm
Depth with alternative assembly
39 mm
Efficiency
typ. 92.2 % (24 V DC)
Maximum altitude
≤ 5000 m (> 2000 m, observe derating)
Overvoltage category EN 62477-1
III
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
DNV GL noise radiation
Class B
Electromagnetic HF field
EN 61000-4-3
Frequency range
50 Hz ... 60 Hz
Signal
2 kV (Test Level 3 - asymmetrical)
Frequency
0 Hz
Test level 2
150 Hz 1.5 kHz (Test Level 3)
Test level 6
0 Hz 16.7 Hz 50 Hz 60 Hz (Test Level 3)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
REACh SVHC
Lead 7439-92-1
ETIM 6.0
EC002046
Mains buffering
typ. 14 ms (24 V DC)
Insulation voltage input/output
4 kV DC (type test)
Type test (IEC/EN 60950-1) C
0.5 kV DC
Stripping length
8 mm
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve)
0.2 mm² ... 1.5 mm²
Setting range of the output voltage (USet)
24 V DC ... 29.5 V DC (> 24 V DC, constant capacity)
Short-circuit-proof
yes
Connection in parallel
Yes, for redundancy and increased capacity
Types of signaling
LED
Connection labeling
3.4 +
Maximum contact load
24 V DC
MTBF (IEC 61709, SN 29500)
> 1600000 h (25 °C)
Time
520000 h
Protection class
Special with SELV input and output
Side element version
Aluminum
Height with alternative assembly
130 mm
Digital
0 V DC
Inrush current limitation typical
1 A
Type test (IEC/EN 60950-1) B
4 kV DC
Production test A
2 kV DC
Conductor cross section solid
0.2 mm² ... 1 mm²
Conductor cross section AWG
24 ... 16
Static Boost (IStat.Boost)
6.25 A
No-load proof
yes
Connection in series
yes
UOut
> 0.9 x USet (LED lights up green)
Switch contact
floating
Temperature
30 °C
Hood version
Stainless steel X6Cr17
Width with alternative assembly
122 mm
Weight
0.6 kg
Power loss nominal load max.
< 10 W
Climatic class
3K3 (EN 60721)
EMC requirements for noise immunity
EN 61000-6-1
Standards/regulations
EN 61000-4-29
Additional text
Test Level 2
Electrostatic discharge
EN 61000-4-2
Output
1 kV (Test Level 3 - symmetrical)
I/O/S
asymmetrical
Voltage dip
0 %
Damped oscillating magnetic field
EN 61000-4-10
Input, output (test level 1)
100 kHz 1 MHz (Test Level 2 - symmetrical)
Attenuated oscillating wave
EN 61000-4-18
ECLASS 11.0
27210901
Flexible conductor cross section (ferrule with plastic sleeve)
0.2 mm² ... 0.75 mm²
Nominal output current (IN)
5 A
System deviation, static
< 1 % (change in load, static 10 % ... 90 %)
Residual ripple
< 10 mVPP
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Analog
4 mA ... 20 mA ±5 % (Load ≤400 Ω)
Function
Signal ground
Auxiliary converter stage
190 kHz ... 220 kHz (Auxiliary converter stage)
Degree of protection
IP20
Width
36 mm
Power dissipation SLEEP MODE
< 1 W
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Vibration (operation)
5 Hz ... 100 Hz resonance search 2.3g, 90 min., resonance frequency 2.3g, 90 min. (according to DNV GL Class C)
Overvoltage category EN 61010-1
II
Designation
Shipbuilding
Identification
ABS
Contact discharge
8 kV (Test Level 4)
Comments
Criterion A
Surge voltage load (surge)
EN 61000-4-5
Asymmetrical conducted disturbance variables
EN 61000-4-16
Test level 4
15 kHz 150 kHz (Test Level 3)
Test level 3
1.5 kHz 15 kHz (Test Level 3)
Input, output (test level 3)
10 MHz (Test Level 2 - asymmetrical)
ECLASS 10.0.1
27210901
Maximum power dissipation in no-load condition
< 2 W
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Shock
18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Degree of pollution
2
Standard designation
Mains variation/undervoltage
Conducted noise emission
EN 55016
Noise emission
EN 55016
Discharge in air
15 kV (Test Level 4)
Input
1 kV (Test Level 3 - symmetrical)
Conducted interference
EN 61000-4-6
Voltage dips
EN 61000-4-29
Test level 1
15 Hz 150 Hz (Test Level 3)
Alternating component of DC voltage
EN 61000-4-17
Signals (test level 2)
100 kHz 1 MHz (Test Level 2 - asymmetrical)
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ECLASS 9.0
27210901
Ambient temperature (start-up type tested)
-40 °C
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
EMC requirements for noise emission
EN 61000-6-3
EMC requirements, power plant
IEC 61850-3
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
DNV GL conducted interference
Class B
Test field strength
100 A/m
Fast transients (burst)
EN 61000-4-4
Power frequency magnetic field
EN 61000-4-8
Pulse-shape magnetic field
EN 61000-4-9
Test level 5
16.7 Hz 50 Hz 60 Hz 150 Hz 180 Hz (Test Level 3)
Input, output (test level 2)
100 kHz 1 MHz (Test Level 2 - asymmetrical)
Criterion A
Normal operating behavior within the specified limits.
Signals (test level 1)
100 kHz 1 MHz (Test Level 2 - symmetrical)
ETIM 7.0
EC002046

Product condition