1012969 Phoenix Contact Electrical Connectors

1012969 Product Details

• Stripping length of the sheath
  31 mm
• Rated current at 40°C
  4 A (2 A when using 0.14 mm² conductors)
• Standards/regulations
  acc. to DIN EN 45545-2
• Status display
  No
• Contact carrier material
  PA 6.6
• Sealing material
  NBR
• Diameter housing
  19 mm
• Ambient temperature (operation)
  -40 °C ... 85 °C (Plug / socket)
• Coding
  A - standard
• Degree of pollution
  3
• Torque
  0.4 Nm (M12 knurl)
• Material, knurls
  Zinc die-cast, nickel-plated
• ECLASS 11.0
  27440102
• Stripping length of the individual wire
  7 mm
• Note
  NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
• Color handle area
  black
• Conductor cross section
  0.14 mm² ... 0.75 mm² (without ferrule)
• Assembly instructions
  The connector pin assignment can be rotated 45° to the cable outlet
• Contact surface material
  Ni/Au
• Additional material specifications
  PBT (Pressure nut, weight: 2.36 g)
ECLASS 9.0
27440102
Length
49 mm
Number of positions
5
Insulation resistance
≥ 100 MΩ
Signal type/category
CANopen®
Connection method
Push-in connection
Insertion/withdrawal cycles
≥ 100
Contact material
CuSn
Material of grip body
PA 6.6
ECLASS 10.0.1
27440102
External cable diameter
4 mm ... 8 mm
Degree of protection
IP65
Rated voltage
48 V AC
Overvoltage category
II
Conductor cross section AWG
26 ... 18 (without ferrule)
Flammability rating according to UL 94
V0
Standards/specifications
M12 connector IEC 61076-2-101

Product condition