1012966 Phoenix Contact Electrical Connectors

1012966 Product Details

• Stripping length of the individual wire
  7 mm
• Note
  NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties.
• Rated voltage
  48 V AC
• Signal type/category
  CANopen®
• Assembly instructions
  The wires can be connected both with ferrules and without ferrules
• Material, knurls
  Zinc die-cast, nickel-plated
• Number of positions
  5
• Overvoltage category
  II
• Conductor cross section AWG
  26 ... 18 (without ferrule)
• Torque
  0.4 Nm (M12 knurl)
• Contact carrier material
  PA 6.6
• Additional material specifications
  PBT (Pressure nut, weight: 2.36 g)
• Length
  60 mm
• Stripping length of the sheath
  24 mm
• Color handle area
  black
• Standards/regulations
  acc. to DIN EN 45545-2
• Connection method
  Push-in connection
• Contact material
  CuSn
• ECLASS 10.0.1
  27440102
• External cable diameter
  4 mm ... 8 mm
Degree of protection
IP65
Insulation resistance
≥ 100 MΩ
Degree of pollution
3
Insertion/withdrawal cycles
≥ 100
Contact surface material
Ni/Au
Standards/specifications
M12 connector IEC 61076-2-101
ECLASS 9.0
27440102
Diameter housing
19 mm
Ambient temperature (operation)
-40 °C ... 85 °C (Plug / socket)
Rated current at 40°C
4 A (2 A when using 0.14 mm² conductors)
Coding
A - standard
Status display
No
Conductor cross section
0.14 mm² ... 0.75 mm² (without ferrule)
Flammability rating according to UL 94
V0
Material of grip body
PA 6.6
Sealing material
NBR
ECLASS 11.0
27440102

Product condition