0501059 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section solid max.
  4 mm²
• ECLASS 9.0
  27141120
• UNSPSC 19.0
  39121410
• Conductor cross section flexible max.
  2.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• 2 conductors with same cross section, stranded max.
  1.5 mm²
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ETIM 2.0
  EC000897
• UNSPSC 21.0
  39121410
• UNSPSC 13.2
  39121410
• UNSPSC 20.0
  39121410
• ETIM 4.0
  EC000897
• ETIM 7.0
  EC000897
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.25 mm²
• UNSPSC 18.0
  39121410
• Operating temperature
  -60 °C ... 180 °C
• ECLASS 10.0.1
  27141120
• ECLASS 5.1
  27141100
• ETIM 6.0
  EC000897
• Material
  Ceramics
Nominal voltage UN
690 V
Result of surge voltage test
Test passed
Potentials
1
Tight fit on carrier
NS 32
Nominal cross section
2.5 mm²
Short-time current
0.48 kA
Tightening torque max
0.6 Nm
Rated surge voltage
8 kV
Nominal current IN
24 A
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Setpoint
1 N
Relative insulation material temperature index (Elec., UL 746 B)
1000 °C
Connection method
Screw connection
Stripping length
9 mm
Conductor cross section flexible min.
0.2 mm²
Max. AWG conductor cross section, flexible
12
2 conductors with same cross section, solid max.
1.5 mm²
Number of connections
2
Insulating material
PA
Overvoltage category
III
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
ECLASS 4.0
27141100
Number of levels
1
Maximum load current
32 A (with 4 mm² conductor cross section)
Insulating material group
I
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Width
6.2 mm
Tightening torque, min
0.5 Nm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
ECLASS 5.0
27141100
Color
ivory
Degree of pollution
3
Maximum power dissipation for nominal condition
0.77 W
Shock protection test specification
IEC 60529:2001-02
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Short circuit stability result
Test passed
Result of voltage-drop test
Test passed
End cover width
3.5 mm
Height NS 32
48 mm
Conductor cross section AWG max.
12
Conductor cross section solid min.
0.2 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Internal cylindrical gage
A3
ECLASS 6.0
27141100
ECLASS 4.1
27141100
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 12.01
39121410
Tensile test result
Test passed
Screw thread
M3
Connection in acc. with standard
CSA
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
for a short time, not exceeding 24 h, -60 °C to +70 °C
ECLASS 11.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
Conductor cross section short circuit testing
4 mm²
Length
38 mm
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Result of temperature-rise test
Test passed