3208198 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Rated surge voltage
  6 kV
• Back of the hand protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Setpoint
  1 N
• Result of thermal test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Test duration per axis
  5 h
• Shock duration
  18 ms
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height NS 35/15
  39.5 mm
• Connection in acc. with standard
  IEC 60947-7-1
• Conductor cross section AWG max.
  16
• Min. AWG conductor cross section, flexible
  26
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Color
  gray
• Maximum power dissipation for nominal condition
  0.56 W
• Open side panel
  Yes
Finger protection
guaranteed
Nominal cross section
1.5 mm²
Degree of pollution
3
Insulating material group
I
Nominal current IN
10 mA
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.5 kV
Result of voltage-drop test
Test passed
Short-time current
0.18 kA
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
32 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 3.0
EC000897
ETIM 4.0
EC000897
UNSPSC 11
39121410
Number of connections
4
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
24 V DC
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of levels
1
Flammability rating according to UL 94
V0
Maximum load current
10 mA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
1.5 mm²
Acceleration
30g
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
3.5 mm
Length
63.2 mm
Connection method
Push-in connection
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm²
Connection cross sections directly pluggable
0.25 mm² 1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
Bending test turns
135
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Height
30.5 mm
Connection
1 level
Conductor cross section solid min.
0.25 mm²
Max. AWG conductor cross section, flexible
16
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A1 / B1
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410