3210280 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  4
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Nominal voltage UN
  24 V
• Finger protection
  guaranteed
• Bending test turns
  135
• Result of temperature-rise test
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Result of aging test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Height
  35.3 mm
• Stripping length
  8 mm ... 10 mm
• Conductor cross section solid min.
  0.34 mm²
• Min. AWG conductor cross section, flexible
  26
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.34 mm²
• Internal cylindrical gage
  A3
• Ambient temperature (assembly)
  -5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 6.01
30211811
Potentials
1
Rated surge voltage
8 kV
Maximum load current
10 mA (with 4 mm² conductor cross section, rigid)
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Height NS 35/7,5
36.8 mm
Connection
1 level
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
UNSPSC 18.0
39121410
Insulating material
PA
Overvoltage category
III
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Setpoint
1 N
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
72.2 mm
Nominal cross section
2.5 mm²
Degree of pollution
3
Nominal current IN
10 mA
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.5 kV
Tensile test result
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG max.
12
Conductor cross section AWG min.
26
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ECLASS 4.0
27141100
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of levels
1
Color
gray
Maximum power dissipation for nominal condition
0.77 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Short-time current
0.48 kA
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/15
44.3 mm
Conductor cross section solid max.
4 mm²
Max. AWG conductor cross section, flexible
14
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410