KFU8-UFC-1.D.FA Pepperl + Fuchs Electronic Components
Part#:KFU8-UFC-1.D.FA
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Frequency Converter with Trip Values, 1-channel signal conditioner, Universal usage at different power supplies, Input for 2- or 3-wire sensors, NAMUR sensors or dry contacts, Input frequency 1 mHz ... 10 kHz, Current output 0/4 mA ... 20 mA, Relay contac
Check out the KFU8-UFC-1.D.FA Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
- Dimensions 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2
- Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
- Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
- Degree of protection IEC 60529:2001
- Mass 300 g
- Electromagnetic compatibility NE 21:2006
- Labeling space for labeling at the front
- Directive 2014/35/EU EN 61010-1:2010
- Configuration via operating buttons, via PACTware
- Directive 2014/30/EU EN 61326-1:2006
- Display elements LEDs , display
- Output III/IV basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff
- Control elements Control panel
- Output IV/power supply reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Interface/output III basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 Veff
- Output III/power supply reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Interface/power supply reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Start-up override/power supply reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Mutual output I, II, III reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Output I, II/other circuits reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Input I/other circuits reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Response delay ≤ 200 ms
- Measuring time < 100 ms
- Influence of ambient temperature 0.003 %/K (30 ppm)
- Accuracy 0.1 % of the measurement value , > 0.001 Hz
- Resolution 0.1 % of the measurement value , ≥ 0.001 Hz
- Measurement range 0.001 ... 10000 Hz
- Fault signal downscale I ≤ 3.6 mA , upscale ≥ 21.5 mA (acc. NAMUR NE43)
- Load max. 650 Ω
- Open loop voltage max. 24 V DC
- Current range 0 ... 20 mA or 4 ... 20 mA
- Output IV analog
- Contact loading 250 V AC / 2 A / cos φ ≥ 0.7 ; 40 V DC / 2 A
- Output III electronic output, passive
- Signal level 1-signal: (L+) -2.5 V (50 mA, short-circuit/overload proof), 0-signal: blocked output (off-state current ≤ 10 µA)
- Output I, II signal, relay
- Mechanical life 5 x 107switching cycles
- Energized/De-energized delay approx. 20 ms / approx. 20 ms
- Active/Passive I > 4 mA (for min. 100 ms) / I < 1.5 mA
- Input II startup override: 1 ... 1000 s, adjustable in steps of 1 s
- Pulse duration > 50 µs
- Line fault detection breakage I ≤ 0.15 mA; short-circuit I > 4 mA
- Input frequency 0.001 ... 10000 Hz
- Switching point/switching hysteresis logic 1: > 2.5 mA ; logic 0: < 1.9 mA
- Input resistance 4.7 kΩ
- Input I 2- or 3-wire sensor, sensor acc. to EN 60947-5-6 (NAMUR) or mechanical contact
- Open circuit voltage/short-circuit current 22 V / 40 mA
- Power dissipation/power consumption ≤ 2 W ; 2.5 VA / 2.2 W ; 3 VA
- Connection side field side
- Programming interface programming socket
- Rated voltage 20 ... 90 V DC / 48 ... 253 V AC 50 ... 60 Hz
- Safety Integrity Level (SIL) SIL 2
- Signal type Digital Input
- Connection terminals 23, 24
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents KFU8-UFC-1.D.FA Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
