Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

KFU8-CRG2-EX1.D Pepperl + Fuchs Electronic Components

Pepperl + Fuchs KFU8-CRG2-EX1.D Transmitter Power Supply, 1-channel isolated barrier, Universal usage at different power supplies, Input 2-wire and 3-wire transmitters and 2-wire current sources, Output 0/4 mA ... 20 mA, 2 relay contact outputs, Adjustable energized/de-energized delay,
Pepperl + Fuchs

Part#:KFU8-CRG2-EX1.D

Manufacturer:Pepperl + Fuchs

Product Lifecycle:Active

Get a quick Quote!

Transmitter Power Supply, 1-channel isolated barrier, Universal usage at different power supplies, Input 2-wire and 3-wire transmitters and 2-wire current sources, Output 0/4 mA ... 20 mA, 2 relay contact outputs, Adjustable energized/de-energized delay,

Check out the KFU8-CRG2-EX1.D Pepperl + Fuchs price in the box on the right side or send a quick quote.

Product Details

  • Supplementary information
    Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
  • IECEx marking
    [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
  • Control drawing
    16-554FM-12 (cFMus)
  • IECEx certificate
    IECEx TUN 09.0007
  • Power
    0.603 W
  • Directive 2014/34/EU
    EN 60079-0:2012+A11:2013 , EN 60079-11:2012
  • Interface
    RS 232
  • Maximum safe voltage Um
    40 V (Attention! The rated voltage can be lower.)
  • Current
    93 mA
  • Voltage
    25.8 V
  • Equipment
    terminals 1+, 3-
  • Maximum safe voltage
    253 V AC (Attention! The rated voltage can be lower.)
  • Marking
    Ex-HexagonII (1)G [Ex ia Ga] IIC, Ex-HexagonII (1)D [Ex ia Da] IIIC, Ex-HexagonI (M1) [Ex ia Ma] I
  • EU-type examination certificate
    TÜV 01 ATEX 1701
  • Input
    Ex ia
  • Mounting
    on 35 mm DIN mounting rail acc. to EN 60715:2001
  • Degree of protection
    IEC 60529:2001
  • Electromagnetic compatibility
    NE 21:2006
  • Mass
    300 g
  • Dimensions
    40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2
  • Ambient temperature
    -20 ... 60 °C (-4 ... 140 °F)
  • Labeling
    space for labeling at the front
  • Directive 2014/35/EU
    EN 61010-1:2010
  • Directive 2014/30/EU
    EN 61326-1:2013 (industrial locations)
  • Display elements
    LEDs , display
  • Configuration
    via operating buttons, via PACTware
  • Control elements
    Control panel
  • Interface/power supply
    reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
  • Reaction time
    < 650 ms at bounce from 0 ... 20 mA at the input, 90 % of output full-scale value
  • Output III/power supply
    reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
  • Mutual output I, II, III
    reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
  • Output I, II/other circuits
    reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
  • Input/Other circuits
    reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
  • Energized/De-energized delay
    0 ... 250 s , adjustable
  • Fault signal
    downscale I ≤ 3.6 mA, upscale I ≥ 21.5 mA (acc. NAMUR NE43)
  • Resolution
    ≤ 10 µA
  • Accuracy
    < 30 µA
  • Response delay
    ≤ 200 ms at bounce from 0 ... 20 mA
  • Influence of ambient temperature
    0.003 %/K (30 ppm)
  • Open loop voltage
    max. 24 V DC
  • Current range
    0 ... 20 mA or 4 ... 20 mA
  • Load
    max. 650 Ω
  • Mechanical life
    5 x 107switching cycles
  • Output III
    Signal, analog
  • Output I, II
    signal, relay
  • Output signal
    0 ... 20 mA or 4 ... 20 mA
  • Contact loading
    250 V AC / 2 A / cos φ ≥ 0.7 ; 40 DC / 2 A
  • Line fault detection
    breakage I < 0.2 mA; short-circuit I > 22 mA
  • Open circuit voltage/short-circuit current
    24 V / 33 mA
  • Available voltage
    > 15 V at 20 mA
  • Programming interface
    programming socket
  • Input resistance
    45 Ω (terminals 2, 3)
  • Safety Integrity Level (SIL)
    SIL 2
  • Connection side
    field side
  • Connection
    terminals 23, 24
  • Input signal
    0/4 ... 20 mA
  • Rated voltage
    20 ... 90 V DC or 48 ... 253 V AC
  • Power dissipation
    2 W / 3 VA
  • Power consumption
    2.2 W / 4 VA
  • Signal type
    Analog input

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging



Related documents KFU8-CRG2-EX1.D Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Pepperl + Fuchs

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Pepperl + Fuchs Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo