KCD2-STC-EX1 Pepperl + Fuchs Electronic Components
Part#:KCD2-STC-EX1
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
In-stock parts: 5
Nov 28, 2024
SMART Transmitter Power Supply, 1-channel isolated barrier, 24 V DC supply (Power Rail), Input for 2-wire SMART transmitters and current sources, Output for 4 mA ... 20 mA or 1 V ... 5 V, Housing width 12.5 mm, Up to SIL 2 (SC 3) acc. to IEC/EN 61508, Hou
Check out the KCD2-STC-EX1 Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- IECEx certificate IECEx CES 06.0001X
- Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
- IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I, Ex ec IIC T4 Gc
- UL approval E106378
- FM certificate FM 18 CA 0116 X , FM 19 US 0117 X
- Control drawing 116-0469 (cFMus)
- Internal inductance negligible
- Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015
- Certificate CESI 19 ATEX 021 X
- Internal capacitance 5.7 nF
- Equipment terminals 1+, 2-
- Power 630 mW
- Voltage 25.2 V
- Current 100 mA
- Maximum safe voltage 250 V AC (Attention! Umis no rated voltage.)
- Input Ex ia
- Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
- Marking
II (1)G [Ex ia Ga] IIC, II (1)D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I - Dimensions 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
- Degree of protection IEC 60529:2001
- EU-type examination certificate CESI 06 ATEX 021
- Protection against electrical shock UL 61010-1:2012
- Mass approx. 100 g
- Ambient temperature -40 ... 70 °C (-40 ... 158 °F)
- Electromagnetic compatibility NE 21:2017, EN 61326-3-2:2018
- Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
- Control elements DIP switch
- Output/power supply basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Labeling space for labeling at the front
- Input/Output basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Display elements LED
- Configuration via DIP switches
- Settling time ≤ 50 ms
- Input/power supply reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
- Rise time/fall time ≤ 10 ms
- Influence of ambient temperature < 2 µA/K (-20 ... 70 °C (-4 ... 158 °F)); < 4 µA/K (-40 ... -20 °C (-40 ... -4 °F)) (source mode and sink mode 4 ... 20mA), < 0.5 mV/K (-20 ... 70 °C (-4 ... 158 °F)); < 1 mV/K (-40 ... -20 °C (-40 ... -4 °F)) (source mode 1...5 V),
- Deviation at 20 °C (68 °F), < 0.1 % of full scale, incl. non-linearity and hysteresis (source mode and sink mode 4 ... 20 mA), ≤ ± 0.2 % incl. non-linearity and hysteresis (source mode 1 ... 5 V)
- Load 0 ... 350 Ω (source mode)
- Available voltage terminals 1+, 2-: ≥ 15 V at 20 mA ; ≥ 18 V at 4 mA
- Voltage drop terminals 3+, 4- : approx. 5 V
- Frequency range field side into the control side: bandwidth with 0.5 Vppsignal 0 ... 3 kHz (-3 dB), control side into the field side: bandwidth with 0.5 Vppsignal 0 ... 3 kHz (-3 dB)
- Open circuit voltage/short-circuit current terminals 1+, 2-: 22 V / 26 mA
- Input signal 4 ... 20 mA limited to approx. 26 mA
- Connection side field side
- Output signal source mode: 4 ... 20 mA or 1 ... 5 V (internal resistor: 250 Ω, 0.1 %), sink mode: 4 ... 20 mA, operating voltage 10 ... 30 V, For additional internal or external loads (e. g. terminal +8) the voltage drop has to be considered, e. g. 250 Ω x 20 mA = 5 V.
- Safety Integrity Level (SIL) SIL 2
- Rated voltage 19 ... 30 V DC
- Signal type Analog input
- Systematic capability (SC) SC 3
- Connection Power Rail or terminals 9+, 10-
- Power dissipation ≤ 800 mW
- Power consumption ≤ 1.1 W
- Ripple ≤ 10 %
- Rated current ≤ 45 mA at 24 V and 20 mA source mode output
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents KCD2-STC-EX1 Specs
This item can ship within 24h!
1-year warranty
$548.96
Stock:
5
Select Qty:
$548.96
$548.96 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
