KCD2-ST-1.LB Pepperl + Fuchs Electronic Components
Part#:KCD2-ST-1.LB
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Switch Amplifier, 1-channel signal conditioner, 24 V DC supply (Power Rail), Dry contact or NAMUR input, 2 active transistor outputs, Usable as signal splitter (1 input and 2 outputs), Reversible mode of operation, Line ult detection (LFD), Housing width
Check out the KCD2-ST-1.LB Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Dimensions 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
- Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
- Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
- Mass approx. 100 g
- Protection against electrical shock IEC 61010-1:2010
- Electromagnetic compatibility NE 21:2011
- Ambient temperature -20 ... 60 °C (-4 ... 140 °F), extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions
- Degree of protection IEC 60529:2001
- Input EN 60947-5-6:2000
- Labeling space for labeling at the front
- Display elements LEDs
- Configuration via DIP switches
- Output/Output not available , common pole terminal 9+
- Control elements DIP switch
- Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
- Output/power supply not available , common pole terminal 9+
- Input/Output reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
- Switching frequency ≤ 5 kHz
- Input/power supply reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
- Signal level 1-signal: (supply voltage) - 3 V max. for 50 mA, 0-signal: blocked output (off-state current ≤ 10 µA)
- Output I signal ; Transistor
- Output II signal or fault message ; Transistor
- Collective error message Power Rail
- Open circuit voltage/short-circuit current approx. 10 V DC / approx. 8 mA
- Pulse/Pause ratio min. 100 µs / min. 100 µs
- Response time ≤ 200 µs
- Line fault detection breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
- Switching point/switching hysteresis 1.2 ... 2.1 mA / approx. 0.2 mA
- Rated values acc. to EN 60947-5-6 (NAMUR)
- Signal type Digital Input
- Rated voltage 19 ... 30 V DC
- Ripple ≤ 10 %
- Systematic capability (SC) SC 3
- Power dissipation ≤ 700 mW including maximum power dissipation in the output
- Rated current 20 ... 15 mA + Iout
- Connection Power Rail or terminals 9+, 10-
- Safety Integrity Level (SIL) SIL 2
- Connection side field side
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents KCD2-ST-1.LB Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
