KCD2-SOT-2 Pepperl + Fuchs Electronic Components
Part#:KCD2-SOT-2
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
Switch Amplifier, 2-channel signal conditioner, 24 V DC supply (Power Rail), Dry contact or NAMUR inputs, 2 passive transistor outputs, Reversible mode of operation, Line ult detection (LFD), Housing width 12.5 mm, Up to SIL 2 (SC 3) acc. to IEC/EN 61508,
Check out the KCD2-SOT-2 Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Input EN 60947-5-6:2000
- Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
- Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
- Mass approx. 100 g
- Dimensions 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
- Degree of protection IEC 60529:2001
- Ambient temperature -20 ... 60 °C (-4 ... 140 °F), extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions
- Protection against electrical shock IEC 61010-1:2010
- Labeling space for labeling at the front
- Electromagnetic compatibility NE 21:2011
- Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
- Configuration via DIP switches
- Display elements LEDs
- Control elements DIP switch
- Output/power supply basic insulation according to EN 50178, rated insulation voltage 50 Veff
- Input/power supply reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
- Input/Output reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
- Output/Output basic insulation according to EN 50178, rated insulation voltage 50 Veff
- Switching frequency ≤ 5 kHz
- Output I signal ; Transistor
- Collective error message Power Rail
- Output II signal ; Transistor
- Signal level 1-signal: (external voltage) - 3 V max. for 50 mA, 0-signal: blocked output (off-state current ≤ 10 µA)
- Response time ≤ 200 µs
- Switching point/switching hysteresis 1.2 ... 2.1 mA / approx. 0.2 mA
- Pulse/Pause ratio min. 100 µs / min. 100 µs
- Open circuit voltage/short-circuit current approx. 10 V DC / approx. 8 mA
- Line fault detection breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
- Rated values acc. to EN 60947-5-6 (NAMUR)
- Signal type Digital Input
- Power dissipation ≤ 800 mW including maximum power dissipation in the output
- Rated voltage 19 ... 30 V DC
- Ripple ≤ 10 %
- Connection Power Rail or terminals 9+, 10-
- Rated current 30 ... 20 mA
- Connection side field side
- Systematic capability (SC) SC 3
- Safety Integrity Level (SIL) SIL 2
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents KCD2-SOT-2 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
