KCD2-STC-EX1.ES Pepperl + Fuchs Electronic Components
Part#:KCD2-STC-EX1.ES
Manufacturer:Pepperl + Fuchs
Product Lifecycle:Active
Get a quick Quote!
SMART Transmitter Power Supply, 1-channel isolated barrier, 24 V DC supply (Power Rail), Input for 2-wire SMART transmitters and current sources, Output for 4 mA ... 20 mA or 1 V ... 5 V, Sink or source mode, Line ult detection (LFD), Housing width 12.5 m
Check out the KCD2-STC-EX1.ES Pepperl + Fuchs price in the box on the right side or send a quick quote.
Product Details
- Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
- IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I, Ex ec IIC T4 Gc
- IECEx certificate IECEx CES 11.0001X
- Certificate CESI 19 ATEX 005 X
- Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015
- Internal inductance negligible
- Control drawing 116-0378 (cULus)
- UL approval E106378
- Current 100 mA
- Input Ex ia
- Equipment terminals 1+, 2-
- Power 630 mW
- Internal capacitance 5.7 nF
- Voltage 25.2 V
- Maximum safe voltage 253 V AC (Attention! Umis no rated voltage.)
- Dimensions 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
- Electromagnetic compatibility NE 21:2017, For further information see system description.
- Marking
II (1)G [Ex ia Ga] IIC, II (1)D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I - Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
- Labeling space for labeling at the front
- Ambient temperature -20 ... 70 °C (-4 ... 158 °F)
- EU-type examination certificate CESI 10 ATEX 071
- Mass approx. 100 g
- Input/Output safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
- Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
- Degree of protection IEC 60529:2001
- Configuration via DIP switches
- Control elements DIP switch
- Display elements LEDs
- Input/power supply safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
- Output/power supply Basic isolation acc. to EN 61010-1 rated insulation voltage ≤ 50 V
- Rise time/fall time ≤ 20 ms
- Settling time ≤ 200 ms
- Frequency range field side into the control side: bandwidth with 1 mAppsignal 0 ... 3 kHz (-3 dB), control side into the field side: bandwidth with 0.5 Vppsignal 0 ... 3 kHz (-3 dB)
- Influence of ambient temperature < 2 µA/K (0 ... 70 °C (32 ... 158 °F)); < 4 µA/K (-20 ... 0 °C (-4 ... 32 °F)) (source mode and sink mode 4 ... 20 mA), < 0.5 mV/K (0 ... 70 °C (32 ... 158 °F)); < 1 mV/K (-20 ... 0 °C (-4 ... 32 °F)) (source mode 1 ... 5 V)
- Deviation at 20 °C (68 °F), ≤ ± 20 µA incl. calibration, linearity, hysteresis, loads and supply voltage fluctuations (source mode and sink mode 4 ... 20 mA), ≤ 10 mV incl. calibration, linearity, hysteresis and fluctuations of supply voltage (source mode 1 ... 5
- Output type fault bus signal , open collector transistor
- Output signal source mode: 4 ... 20 mA or 1 ... 5 V (internal resistor: 250 Ω, 0.1 %), sink mode: 4 ... 20 mA, operating voltage 16 ... 28 V, For additional internal or external loads the voltage drop has to be considered, e. g. 250 Ω x 20 mA = 5 V.
- Available voltage ≥ 15 V at 20 mA terminals 1+, 2-
- Load 0 ... 300 Ω (source mode)
- Voltage drop approx. 5 V on terminals 3+, 4-
- Line fault detection downscaling ≤ 3 mA ; upscaling ≥ 22 mA
- Input signal 4 ... 20 mA , limited to approx. 27 mA reverse polarity protected
- Connection side field side
- Power dissipation ≤ 800 mW
- Safety Integrity Level (SIL) SIL 3
- Rated voltage 19 ... 30 V DC
- Ripple ≤ 10 %
- Rated current ≤ 50 mA
- Connection Power Rail or terminals 9+, 10-
- Power consumption ≤ 1.2 W
- Signal type Analog input
- Systematic capability (SC) SC 3
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents KCD2-STC-EX1.ES Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Pepperl + Fuchs
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Pepperl + Fuchs Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pepperl + Fuchs Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pepperl + Fuchs, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
