8118304 Festo Electric Actuators

8118304 Product Details

• Additional functions
  User interface Integrated end-position sensing
• Power supply, type of connection
  Plug
• Number of digital logic inputs
  2
• IO-Link®, SIO mode support
  Yes
• IO-Link®, number of ports
  1
• Stroke
  500 mm
• Spindle pitch
  12 mm/U
• Type code
  EPCS
• Homing
  Fixed stop block positive Reference switch
• Insulation protection class
  B
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Relative air humidity
  0 - 90 % Non-condensing
• Certification
  RCM compliance mark
• Max. radial force on actuator shaft
  230 N
• Guide value for payload, vertical
  18 kg
• Basic weight with 0 mm stroke
  2294 g
• Additional moving mass per 10 mm stroke
  6.5 g
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Max. current of digital logic outputs
100 mA
Logic interface, number of poles/wires
8
Work range of logic input
24 V
IO-Link®, process data width IN
2 Byte
IO-Link®, minimum cycle time
1 ms
Piston rod thread
M12x1.25
Max. angle of rotation of the piston rod +/-
1 deg
Spindle type
Ball screw drive
Rotor position sensor
Absolute encoder, single-turn
Storage temperature
-20 °C ... 60 °C
Max. torque Mx
0 Nm
Guide value for payload, horizontal
56 kg
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle material
Roller bearing steel
KC characters
KC EMC
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Ready status indication
LED
Parameterization interface
IO-Link® User interface
Logic interface, connection pattern
00992264
Logic interface, connection type
Plug
Number of digital logic outputs 24 V DC
2
Power supply, number of pins/wires
4
Nominal current
5.3 A
IO-Link®, port class
A
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, data memory required
500 byte
Screw diameter
12 mm
Design
Electric actuator With integrated drive
Symbol
00997294
Max. acceleration
5 m/s²
Duty cycle
100%
Permissible voltage fluctuations
+/- 15 %
Max. torque Mz
6.4 Nm
Max. feed force Fx
375 N
Additional weight per 10 mm stroke
69 g
Spindle nut material
Steel
Max. cable length
15 m outputs 20 m for IO-Link® operation
Characteristics of logic input
Configurable Not galvanically isolated
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
DC nominal voltage
24 V
Rotor position sensor resolution
16 bit
IO-Link®, process data width OUT
2 Byte
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Stroke reserve
0 mm
Piston rod end
External thread
Protection against torsion/guide
With plain-bearing guide
Rotor position sensor measuring principle
Magnetic
Max. speed
0.22 m/s
Degree of protection
IP40
Moving mass at 0 mm stroke
305 g
Piston rod material
High-alloy stainless steel
Display
LED
Logic input specification
Based on IEC 61131-2, type 1
Switching logic at outputs
NPN (negative switching) PNP (positive switching)
Power supply, connection pattern
00995989
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Max. current consumption
5300 mA
Product weight
5744 g
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, protocol version
Device V 1.1
Size
60
Reversing backlash
100 µm
Mounting position
Any
Motor type
Stepper motor
Repetition accuracy
±0.02 mm
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
0 °C ... 50 °C
Max. torque My
6.4 Nm
Type of mounting
With internal thread With accessories
Housing material
Wrought aluminum alloy, smooth-anodized

Product condition

Related documents 8118304 Specs