8118290 Festo Electric Actuators

8118290 Product Details

• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Logic input specification
  Based on IEC 61131-2, type 1
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Number of digital logic outputs 24 V DC
  2
• Number of digital logic inputs
  2
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• IO-Link®, minimum cycle time
  1 ms
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
• Size
  60
• Mounting position
  Any
• Symbol
  00997294
• Protection against torsion/guide
  With plain-bearing guide
• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Logic interface, connection type
  Plug
• Rotor position sensor resolution
  16 bit
• IO-Link®, process data width IN
  2 Byte
IO-Link®, data memory required
500 byte
Piston rod thread
M12x1.25
Motor type
Stepper motor
Rotor position sensor measuring principle
Magnetic
Repetition accuracy
±0.02 mm
Permissible voltage fluctuations
+/- 15 %
Storage temperature
-20 °C ... 60 °C
Max. torque Mz
6.4 Nm
Guide value for payload, vertical
46 kg
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Piston rod material
High-alloy stainless steel
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Parameterization interface
IO-Link® User interface
Logic interface, connection pattern
00992264
Characteristics of logic input
Configurable Not galvanically isolated
Max. current of digital logic outputs
100 mA
Max. current consumption
5300 mA
Nominal current
5.3 A
IO-Link®, port class
A
IO-Link®, communication mode
COM3 (230.4 kBd)
Stroke reserve
0 mm
Max. angle of rotation of the piston rod +/-
1 deg
Design
Electric actuator With integrated drive
Rotor position sensor
Absolute encoder, single-turn
Max. speed
0.09 m/s
Relative air humidity
0 - 90 % Non-condensing
Max. torque My
6.4 Nm
Moving mass at 0 mm stroke
305 g
Basic weight with 0 mm stroke
2294 g
Additional moving mass per 10 mm stroke
6.5 g
KC characters
KC EMC
DC nominal voltage
24 V
Power supply, number of pins/wires
4
Work range of logic input
24 V
Product weight
3674 g
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data width OUT
2 Byte
Stroke
200 mm
Screw diameter
12 mm
Spindle pitch
5 mm/U
Spindle type
Ball screw drive
Max. acceleration
1.5 m/s²
Duty cycle
100%
Degree of protection
IP40
Max. radial force on actuator shaft
230 N
Guide value for payload, horizontal
120 kg
Type of mounting
With internal thread With accessories
Display
LED
Ready status indication
LED
Additional functions
User interface Integrated end-position sensing
Power supply, connection pattern
00995989
Power supply, type of connection
Plug
Logic interface, number of poles/wires
8
IO-Link®, SIO mode support
Yes
IO-Link®, protocol version
Device V 1.1
IO-Link®, number of ports
1
Reversing backlash
100 µm
Type code
EPCS
Piston rod end
External thread
Homing
Fixed stop block positive Reference switch
Insulation protection class
B
Corrosion resistance class (CRC)
0 - No corrosion stress
Certification
RCM compliance mark
Max. torque Mx
0 Nm
Additional weight per 10 mm stroke
69 g
Spindle material
Roller bearing steel
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Ambient temperature
0 °C ... 50 °C
Max. feed force Fx
900 N
Housing material
Wrought aluminum alloy, smooth-anodized
Spindle nut material
Steel

Product condition

Related documents 8118290 Specs