8118284 Festo Electric Actuators

8118284 Product Details

• Display
  LED
• Logic input specification
  Based on IEC 61131-2, type 1
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Ready status indication
  LED
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Additional functions
  User interface Integrated end-position sensing
• Power supply, connection pattern
  00995989
• Parameterization interface
  IO-Link® User interface
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Number of digital logic outputs 24 V DC
  2
• IO-Link®, SIO mode support
  Yes
• IO-Link®, process data width OUT
  2 Byte
• IO-Link®, communication mode
  COM3 (230.4 kBd)
• IO-Link®, data memory required
  500 byte
• Max. angle of rotation of the piston rod +/-
  1 deg
• KC characters
  KC EMC
• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Power supply, type of connection
  Plug
Max. current of digital logic outputs
100 mA
Logic interface, number of poles/wires
8
Product weight
2005 g
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, number of ports
1
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Characteristics of logic input
Configurable Not galvanically isolated
Logic interface, connection pattern
00992264
Power supply, number of pins/wires
4
Nominal current
3 A
IO-Link®, port class
A
IO-Link®, protocol version
Device V 1.1
Stroke
200 mm
Reversing backlash
100 µm
Piston rod end
External thread
Symbol
00997294
Max. acceleration
5 m/s²
Insulation protection class
B
Relative air humidity
0 - 90 % Non-condensing
Max. torque Mx
0 Nm
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Logic interface, connection type
Plug
Max. current consumption
3000 mA
Rotor position sensor resolution
16 bit
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, minimum cycle time
1 ms
Size
45
Spindle pitch
10 mm/U
Motor type
Stepper motor
Characteristics of digital logic outputs
Configurable Not galvanically isolated
DC nominal voltage
24 V
Number of digital logic inputs
2
Work range of logic input
24 V
IO-Link®, process data width IN
2 Byte
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Stroke reserve
0 mm
Screw diameter
10 mm
Design
Electric actuator With integrated drive
Homing
Fixed stop block positive Reference switch
Duty cycle
100%
Corrosion resistance class (CRC)
0 - No corrosion stress
Certification
RCM compliance mark
Guide value for payload, horizontal
40 kg
Type of mounting
With internal thread With accessories
Piston rod thread
M10x1.25
Mounting position
Any
Max. speed
0.23 m/s
Storage temperature
-20 °C ... 60 °C
Ambient temperature
0 °C ... 50 °C
Max. torque Mz
2.9 Nm
Guide value for payload, vertical
13 kg
Basic weight with 0 mm stroke
1185 g
Piston rod material
High-alloy stainless steel
Spindle material
Roller bearing steel
Type code
EPCS
Spindle type
Ball screw drive
Protection against torsion/guide
With plain-bearing guide
Rotor position sensor
Absolute encoder, single-turn
Repetition accuracy
±0.02 mm
Permissible voltage fluctuations
+/- 15 %
Max. torque My
2.9 Nm
Rotor position sensor measuring principle
Magnetic
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Degree of protection
IP40
Max. feed force Fx
250 N
Additional moving mass per 10 mm stroke
4.9 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Max. radial force on actuator shaft
180 N
Moving mass at 0 mm stroke
179 g
Housing material
Wrought aluminum alloy, smooth-anodized
Additional weight per 10 mm stroke
41 g
Spindle nut material
Steel

Product condition

Related documents 8118284 Specs