8118276 Festo Electric Actuators

8118276 Product Details

• Logic input specification
  Based on IEC 61131-2, type 1
• Additional functions
  User interface Integrated end-position sensing
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Number of digital logic inputs
  2
• Power supply, number of pins/wires
  4
• Product weight
  1595 g
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
• IO-Link®, communication mode
  COM3 (230.4 kBd)
• Stroke
  100 mm
• Type code
  EPCS
• Design
  Electric actuator With integrated drive
• Homing
  Fixed stop block positive Reference switch
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Ambient temperature
  0 °C ... 50 °C
• Max. feed force Fx
  450 N
• Basic weight with 0 mm stroke
  1185 g
• KC characters
  KC EMC
• Input switching logic
  NPN (negative switching) PNP (positive switching)
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Logic interface, number of poles/wires
8
Rotor position sensor resolution
16 bit
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, port class
A
IO-Link®, process data width IN
2 Byte
Size
45
IO-Link®, data memory required
500 byte
Spindle pitch
3 mm/U
Motor type
Stepper motor
Symbol
00997294
Rotor position sensor measuring principle
Magnetic
Duty cycle
100%
Relative air humidity
0 - 90 % Non-condensing
Max. torque Mx
0 Nm
Guide value for payload, horizontal
60 kg
Additional weight per 10 mm stroke
41 g
Piston rod material
High-alloy stainless steel
Max. cable length
15 m outputs 20 m for IO-Link® operation
Parameterization interface
IO-Link® User interface
Power supply, type of connection
Plug
Max. current of digital logic outputs
100 mA
Rotor position sensor
Absolute encoder, single-turn
Repetition accuracy
±0.02 mm
Insulation protection class
B
Degree of protection
IP40
Max. torque My
2.9 Nm
Moving mass at 0 mm stroke
179 g
Spindle nut material
Steel
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Display
LED
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Characteristics of logic input
Configurable Not galvanically isolated
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Logic interface, connection type
Plug
Number of digital logic outputs 24 V DC
2
Max. current consumption
3000 mA
Nominal current
3 A
IO-Link®, process data width OUT
2 Byte
IO-Link®, minimum cycle time
1 ms
Stroke reserve
0 mm
Reversing backlash
100 µm
Mounting position
Any
Spindle type
Ball screw drive
Max. speed
0.074 m/s
Storage temperature
-20 °C ... 60 °C
Max. torque Mz
2.9 Nm
Guide value for payload, vertical
23 kg
Additional moving mass per 10 mm stroke
4.9 g
Spindle material
Roller bearing steel
Ready status indication
LED
Power supply, connection pattern
00995989
Logic interface, connection pattern
00992264
DC nominal voltage
24 V
Work range of logic input
24 V
IO-Link®, SIO mode support
Yes
IO-Link®, protocol version
Device V 1.1
IO-Link®, number of ports
1
Piston rod thread
M10x1.25
Screw diameter
10 mm
Max. angle of rotation of the piston rod +/-
1 deg
Piston rod end
External thread
Protection against torsion/guide
With plain-bearing guide
Max. acceleration
1.5 m/s²
Permissible voltage fluctuations
+/- 15 %
Corrosion resistance class (CRC)
0 - No corrosion stress
Certification
RCM compliance mark
Max. radial force on actuator shaft
180 N
Type of mounting
With internal thread With accessories
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Housing material
Wrought aluminum alloy, smooth-anodized

Product condition

Related documents 8118276 Specs