Logic Controllers & Displays

HMIZD57W

Schneider Electric HMIZD57W is a cover designed specifically to provide a seal for 15" units. This part ensures the unit is covered adequately, aligning with the dimensions and specifications required for optimal sealing performance on compatible 15" devices.

Schneider Electric

HMIZD56W

Schneider Electric HMIZD56W is a cover designed specifically to seal 12" units.

Schneider Electric

XBTZGCLP3

Schneider Electric XBTZGCLP3 is a spare part designed for USB fastenings.

Schneider Electric

XBTZGHSTP

Schneider Electric XBTZGHSTP is a spare part designed specifically as a hand strap for compatible devices.

Schneider Electric

XBTZG70

Schneider Electric XBTZG70 is a cover designed with 5 peel-off plastic protective sheets.

Schneider Electric

XBTZG69

Schneider Electric XBTZG69 is a cover designed specifically for use with compatible devices, featuring 5 peel-off protective sheets. These sheets are intended to protect the device's surface from scratches, dust, and other potential damage during use.

Schneider Electric

XBTZG58

Schneider Electric XBTZG58 is a door seal designed for use in automation applications. This part is specifically crafted to ensure a secure seal on doors, preventing the ingress of dust, water, and other contaminants.

Schneider Electric

HMIZS62

Schneider Electric HMIZS62 is a cover designed with 5 peel-off protective sheets.

Schneider Electric

HMIZS501

Schneider Electric HMIZS501 is a sealing component designed specifically as an installation gasket for 4.3" screens.

Schneider Electric

HMIZG52

Schneider Electric HMIZG52 is a door seal designed for automation enclosures, providing a barrier against environmental elements. This part is specifically engineered to enhance the sealing efficiency of doors in various automation setups, ensuring a secure closure.

Schneider Electric

PILZ-328072

Pilz PILZ-328072 is a communications unit designed for Ethernet/IP applications, featuring a Manufacturer ID of 181 and a Product ID of 256. It operates as an adapter device type with a maximum of 1 I/O connection for Ethernet/IP and up to 2 I/O connections for CIP safety, both certified by ODVA. The unit provides potential isolation with functional insulation between various power supplies and connections, ensuring a rated surge voltage of 2500V for most isolations and 1500V between the module supply and Ethernet/IP. It supports DIN rail mounting and can operate within an ambient air temperature range of 0 to +60°C. The unit has a net height of 110.1 mm, a width of 64.1 mm, and a depth of 94.7 mm, with a design that includes a microSD device code C006h for standard/safety units. It has a rated current of 8A for the peripheral supply and utilizes plug-in/detachable spring-loaded terminal connections. The communication module falls under the IP20 protection degree and requires a supply voltage of 16.8-30Vdc, with a nominal 24Vdc for both module and peripheral supply. Constructed with a PPE housing, it supports a communication protocol of Ethernet/IP and has a memory capacity of 508Byte for Ethernet/IP data length and 18Byte for CIP safety data length. The unit accommodates a wire cross-section of 0.15 to 1.5mm2 (26AWG to 14AWG conductors). It is designed for storage in ambient air temperatures ranging from -40 to +70°C and has a rated power output for various operational and no-load conditions. The response time for the Ethernet/IP adapter ranges from 1-3200ms, with a transmission rate of 100MBit/s, and the processing time for CIP safety ranges from 6-3200 ms.

Pilz

PILZ-772035

Pilz PILZ-772035 is a communications unit designed as an expansion/communication module with EtherCAT and CANopen fieldbus interfaces. It features peripheral device type functionality and logs CANopen over EtherCAT with potential isolation between the fieldbus and module voltage, ensuring functional insulation with a rated surge voltage of 500V. This unit is suitable for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C without forced convection in the control cabinet, and up to +55°C with forced convection off. The unit has a net height of 100 mm, a width of 22.5 mm, and a depth of 115 mm. Connection is facilitated through an RJ45 connector plug-in/detachable screw or spring-loaded terminals, supporting 2 points per spring-loaded connection with a 9mm stripping length. It falls under the communication module sub-range, with dimensions of W27mm and a degree of protection rated at IP20. The supply voltage requirement is 19.2-30Vdc, with a nominal 24Vdc. The housing is made of PC material. It supports a communication protocol of EtherCAT CANopen and accommodates a wire cross-section ranging from 0.25 to 2.5mm2 for various connection types. The power consumption of the module supply is 1.5 W. It is designed for storage in ambient air temperatures ranging from -25 to +70°C and includes protection functions such as galvanic isolation and potential isolation. The rated insulation voltage (Ui) is 30 V, with a speed of 100MBit/s for EtherCAT transmission and a time delay of 20ms for supply interruption before de-energization.

Pilz

PILZ-328071

Pilz PILZ-328071 is an I/O unit designed for digital output with electronic patch terminal module capabilities. It supports a range of permitted loads including inductive, capacitive, and resistive, with potential isolation between periphery supply and module supply, ensuring functional insulation and a rated surge voltage of 2500V. This unit operates within an ambient air temperature range of 0 to +60°C and has a net height of 110.8 mm. It features a device code of 0005h with 16 ST status bits and utilizes plug-in/detachable cage-clamp terminal connections. As part of the Patch term. sub-range, it offers an IP20 degree of protection and requires a supply voltage of 16.8-30Vdc, with 24Vdc nominal. The housing is made from PC material, and the unit measures 12.5 mm in width and 72.5 mm in depth. It has a low power consumption, with module supply at 0.28 W, periphery supply module power consumption with no load at 0.53 W, and maximum power consumption of voltage output at 0.055 W. The unit can be stored in temperatures ranging from -40 to +70°C. It features 16 digital outputs (voltage output; 24Vdc; 0.5A) and includes protection functions such as short-circuit proof, potential isolation, and overload proof, with a maximum power dissipation/losses of 1.7 W.

Pilz

PILZ-773733

Pilz PILZ-773733 is a Safety I/O unit designed for DIN rail mounting, compatible with both 35mmx7.5mm top hat and 27mm recess width rails. It operates within an ambient air temperature range of 0 to +60°C and has a net height of 94 mm. This unit features various connection types including screw terminal connections, spring-loaded terminal connections, and an 8-pin RJ45 female connector for incremental encoders, with stripping lengths of 7mm for screw connections and 9mm for spring-loaded connections. As part of the Safe I/O module sub-range, it offers a degree of protection of IP20 and requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) or 4.9-5.1Vdc (5Vdc nominal; module supply via base unit). The frequency ranges for input are 0-3kHz for proximity switches and 0-500kHz for incremental encoders, with monitoring frequencies adjusted for hysteresis. The unit is constructed from PPO for the bottom housing and ABS for the front housing, measures 45 mm in width and 121 mm in depth, and supports wire cross-sections ranging from 0.25 to 1.5mm2 / 24AWG to 16AWG for various connections. Power consumption is 1 W from supply via the base module. It is designed for storage in ambient air temperatures of -25 to +70°C and features protection functions including galvanic isolation and overload proof (-30 to +30V). The rated insulation voltage is 30 V. It includes 4 digital inputs for proximity switches and 2 digital inputs for incremental encoders, with specific signal level requirements. Time delay and angle phase position for differential signals are configurable, ensuring precise control and integration into safety systems.

Pilz

PILZ-773732

Pilz PILZ-773732 is a communications unit designed for expansion and communication tasks within industrial automation systems. It features a CANopen fieldbus interface, supporting the CiA DS-301 V4.02 protocol, making it suitable for connecting to a base unit as a peripheral device. The unit allows for station addresses ranging from 0 to 99d and is designed for DIN rail mounting, compatible with 35mmx7.5mm rails, positioned horizontally. It operates within an ambient air temperature range of 0 to +60°C and has a net height of 94 mm. The connection to the base unit is facilitated through a 9-pin D-sub male connector. Classified under the communication module sub-range, it measures 27mm in width, offers an IP20 degree of protection, and requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) or 4.9-5.1Vdc (5Vdc nominal; module supply via base unit). The housing is made from PPO for the bottom and ABS for the front, ensuring compatibility with various industrial environments. It has a rated voltage of 500Vac for CANopen, a net width of 22.5 mm, and consumes 1W of power from the supply provided via the base unit. The net depth is 119 mm, and it can be stored in temperatures ranging from -25 to +70°C. For protection, it features galvanic isolation, a rated insulation voltage (Ui) of 30 V, and supports multiple transmission rates for CANopen from 10kBit/s up to 1MBit/s, with a time delay of 20ms for supply interruption before de-energization.

Pilz

PILZ-773712

Pilz PILZ-773712 is a communications unit designed as an expansion/communication module with a sercos III fieldbus interface, suitable for peripheral device types. It features DIN rail mounting compatibility (35mmx7.5mm; horizontal) and operates within an ambient air temperature range of 0 to +60°C. The unit has a net height of 94 mm and is specifically designed for connection to a base unit. It utilizes an RJ45 connector for its connection type and falls under the communication module sub-range. With dimensions of W27mm and a degree of protection rated at IP20, it supports a supply voltage of 20.4-28.8Vdc (24Vdc nom.) and 4.9-5.1Vdc (5Vdc nom.; module supply via base unit). The bottom housing is made of PPO, and the front housing is ABS. It has a rated voltage (AC) of 500Vac (test voltage; Sercos III), a net width of 22.5 mm, and communicates via the Sercos protocol. Power consumption is 2.5 W (from supply via base unit), with a net depth of 114 mm. It can be stored in temperatures ranging from -25 to +70°C and features galvanic isolation for protection. The rated insulation voltage (Ui) is 30 V, with a speed of 100MBit/s (transmission rate / Sercos III) and a time delay of 20ms (supply interruption before de-energization).

Pilz

PILZ-773713

Pilz PILZ-773713 is a communications unit designed for expansion and communication tasks within automation systems. It features a CANopen fieldbus interface, supporting the CiA DS-301 V3.0 protocol for seamless integration as a peripheral device. The unit allows for station addresses ranging from 0 to 99d and is mounted using a DIN rail (35mmx7.5mm; horizontal). It operates within an ambient air temperature range of 0 to +60°C and has a net height of 94 mm. The design incorporates a 9-pin D-sub male connector for connections and falls under the communication module sub-range. With dimensions of W27mm x D119 mm and a net width of 22.5 mm, it offers an IP20 degree of protection. The supply voltage requirements are 20.4-28.8Vdc (24Vdc nom.) and 4.9-5.1Vdc (5Vdc nom.; module supply via base unit), with a power consumption of 1 W from the supply via the base unit. The material composition includes a PPO bottom housing and an ABS front housing. It has a rated voltage of 500Vac (test voltage; CANopen) and a rated insulation voltage (Ui) of 30 V. The communication speeds it supports range from 10kBit/s to 1MBit/s, with a time delay of 20ms for supply interruption before de-energization. The unit also features galvanic isolation for enhanced protection.

Pilz

PILZ-772135

Pilz PILZ-772135 is a communications unit designed for automation systems, featuring a CANopen fieldbus interface and supporting a device type as a peripheral. It complies with the CiA 301 V4.2.0 standard for fieldbus interfaces and allows for station addresses ranging from 0 to 99d. This unit offers galvanic isolation with functional insulation rated at a surge voltage of 500V between the fieldbus and module voltage. It is designed for DIN rail mounting, compatible with a 35mmx7.5mm horizontal rail, and operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with it. The unit has a net height of 101.4 mm, requires a maximum external power supply continuous current of 35mA, and connects via a 9-pin D-sub female connector with screw or spring-loaded terminal connections. It falls under the communication module sub-range, measures 22.5mm in width, and is protected by an IP20-rated PC housing in green. The supply voltage ranges from 19.2 to 30Vdc, with a nominal 24Vdc and an additional 3.3Vdc supplied via the base unit. It supports a rated voltage of 500Vac for PROFIBUS-DP testing, has a net depth of 115 mm, and can be stored in temperatures ranging from -25 to +70°C. The unit features galvanic isolation protection, a rated insulation voltage of 30V for potential isolation, and supports various transmission rates for CANopen from 10kbit/s to 1MBit/s. It has a current consumption of 60mA from the supply via the base module and a maximum power dissipation of 1.5W.

Pilz

PILZ-772130

Pilz PILZ-772130 is a communications unit designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail. It functions as a communication module with a CC-Link V1.10 fieldbus interface, supporting device types as a peripheral. The unit allows for a station address range of 1-63d and can be assigned up to 3 stations. It features galvanic isolation for potential isolation between the fieldbus and module voltage, with functional insulation rated at a surge voltage of 500V. The ambient air temperature for operation ranges from 0 to +60°C without forced convection and up to +55°C with it. The unit has a net height of 101.4 mm, a rated current of 45mA for the maximum external power supply continuous current, and offers connection via a 5-pin plug-in connector with screw or spring-loaded terminal connections. It is part of the communication module sub-range, measuring 22.5 mm in width, 110.4 mm in depth, and is protected by an IP20-rated PC housing in green. The supply voltage requirements are 19.2-30Vdc with a nominal 24Vdc, and an additional 3.3Vdc for module supply via the base unit. It supports wire cross-sections ranging from 0.25 to 2.5mm2 for various connection types and has a power consumption of 1.1 W from an external power supply or 0.2 W from the supply via the base unit. The unit is designed for storage in ambient air temperatures of -25 to +70°C, incorporates protection functions like galvanic isolation, and has a rated insulation voltage of 30 V. Communication speeds supported are 156kBit/s, 625kBit/s, 10MBit/s, 2.5MBit/s, and 5MBit/s, with a current consumption of 60mA from the supply via the base module and a maximum power dissipation of 1.5 W.

Pilz

AFP7PSA2

Panasonic AFP7PSA2 is a power supply unit designed for DIN rail mounting, featuring a supply voltage range of 100Vac to 240Vac and a rated current of 1.8A. This unit includes a system error alarm output contact and supports remaining lifespan counting, enhancing its functionality in monitoring and maintenance operations.

Panasonic