​
Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

PILZ-772130 Pilz Logic Controllers & Displays

Pilz PILZ-772130 Pilz PILZ-772130 is a communications unit designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail. It functions as a communication module with a CC-Link V1.10 fieldbus interface, supporting device types as a peripheral. The unit allows for a station address range of 1-63d and can be assigned up to 3 stations. It features galvanic isolation for potential isolation between the fieldbus and module voltage, with functional insulation rated at a surge voltage of 500V. The ambient air temperature for operation ranges from 0 to +60°C without forced convection and up to +55°C with it. The unit has a net height of 101.4 mm, a rated current of 45mA for the maximum external power supply continuous current, and offers connection via a 5-pin plug-in connector with screw or spring-loaded terminal connections. It is part of the communication module sub-range, measuring 22.5 mm in width, 110.4 mm in depth, and is protected by an IP20-rated PC housing in green. The supply voltage requirements are 19.2-30Vdc with a nominal 24Vdc, and an additional 3.3Vdc for module supply via the base unit. It supports wire cross-sections ranging from 0.25 to 2.5mm2 for various connection types and has a power consumption of 1.1 W from an external power supply or 0.2 W from the supply via the base unit. The unit is designed for storage in ambient air temperatures of -25 to +70°C, incorporates protection functions like galvanic isolation, and has a rated insulation voltage of 30 V. Communication speeds supported are 156kBit/s, 625kBit/s, 10MBit/s, 2.5MBit/s, and 5MBit/s, with a current consumption of 60mA from the supply via the base module and a maximum power dissipation of 1.5 W.
Pilz

Part#:PILZ-772130

Manufacturer:Pilz

Product Lifecycle:Active

Get a quick Quote!

Pilz PILZ-772130 is a communications unit designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail. It functions as a communication module with a CC-Link V1.10 fieldbus interface, supporting device types as a peripheral. The unit allows for a station address range of 1-63d and can be assigned up to 3 stations. It features galvanic isolation for potential isolation between the fieldbus and module voltage, with functional insulation rated at a surge voltage of 500V. The ambient air temperature for operation ranges from 0 to +60°C without forced convection and up to +55°C with it. The unit has a net height of 101.4 mm, a rated current of 45mA for the maximum external power supply continuous current, and offers connection via a 5-pin plug-in connector with screw or spring-loaded terminal connections. It is part of the communication module sub-range, measuring 22.5 mm in width, 110.4 mm in depth, and is protected by an IP20-rated PC housing in green. The supply voltage requirements are 19.2-30Vdc with a nominal 24Vdc, and an additional 3.3Vdc for module supply via the base unit. It supports wire cross-sections ranging from 0.25 to 2.5mm2 for various connection types and has a power consumption of 1.1 W from an external power supply or 0.2 W from the supply via the base unit. The unit is designed for storage in ambient air temperatures of -25 to +70°C, incorporates protection functions like galvanic isolation, and has a rated insulation voltage of 30 V. Communication speeds supported are 156kBit/s, 625kBit/s, 10MBit/s, 2.5MBit/s, and 5MBit/s, with a current consumption of 60mA from the supply via the base module and a maximum power dissipation of 1.5 W.

About the manufacturer: Pilz is one of the manufacturers that offers Logic Controllers & Displays that you can order at Quotebeam.com. We are at the forefront of driving the evolution of industrial automation. Our company ethos is built on dedication and principles, placing a high priority on safety. Over the years, we have been devoted to creating cutting-edge products and solutions tailored to our customers' requirements.

Check out the PILZ-772130 Pilz price in the box on the right side or send a quick quote.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

PILZ-772130 Description

Pilz PILZ-772130 is a communications unit designed for DIN rail mounting, specifically on a 35mmx7.5mm horizontal rail. It functions as a communication module with a CC-Link V1.10 fieldbus interface, supporting device types as a peripheral. The unit allows for a station address range of 1-63d and can be assigned up to 3 stations. It features galvanic isolation for potential isolation between the fieldbus and module voltage, with functional insulation rated at a surge voltage of 500V. The ambient air temperature for operation ranges from 0 to +60°C without forced convection and up to +55°C with it. The unit has a net height of 101.4 mm, a rated current of 45mA for the maximum external power supply continuous current, and offers connection via a 5-pin plug-in connector with screw or spring-loaded terminal connections. It is part of the communication module sub-range, measuring 22.5 mm in width, 110.4 mm in depth, and is protected by an IP20-rated PC housing in green. The supply voltage requirements are 19.2-30Vdc with a nominal 24Vdc, and an additional 3.3Vdc for module supply via the base unit. It supports wire cross-sections ranging from 0.25 to 2.5mm2 for various connection types and has a power consumption of 1.1 W from an external power supply or 0.2 W from the supply via the base unit. The unit is designed for storage in ambient air temperatures of -25 to +70°C, incorporates protection functions like galvanic isolation, and has a rated insulation voltage of 30 V. Communication speeds supported are 156kBit/s, 625kBit/s, 10MBit/s, 2.5MBit/s, and 5MBit/s, with a current consumption of 60mA from the supply via the base module and a maximum power dissipation of 1.5 W.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Pilz

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Pilz Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pilz Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pilz, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

PILZ-890170 Part Image. Manufactured by Pilz.

PILZ-890170

Verified stock: 0

Pilz PILZ-890170 is a protection unit designed for DIN rail mounting, featuring a phase sequence monitoring relay. It operates within an ambient air temperature range of -15 to +55°C and has a net height of 87 mm. The unit offers fixed screw terminal connections and requires a supply voltage of 200Vac-240Vac (220Vac / 230Vac nominal) within the S1PN sub-range. With dimensions of W22.5mm x D121mm and a net width of 22.5 mm, it is encased in a PPO housing that provides an IP40 degree of protection. Designed for a 3-phase (3AC) input network with a rated voltage of 200-240Vac, it consumes 8 VA of power. The operating mode is normally energized, and it includes 2 x auxiliary outputs (2CO changeover / 2xSPDT-NO/NC contacts) for digital outputs and 1 x analog input for L1-L3 voltage measurement. Its protection functions include phase sequence and phase failure.

Pilz

PILZ-760100 Part Image. Manufactured by Pilz.

PILZ-760100

Verified stock: 0

Pilz PILZ-760100 is a protection unit designed for true power monitoring and measurement, with limit values that can be adjusted via a display and stored on a chip card. It supports DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. The unit has a net height of 100 mm and accommodates a rated current of 1A-12A for measuring, with safety output contacts ratings of 0.1A-5A at 24Vdc (DC-1; 120W), 0.1A-5A at 240Vac (AC-1; 1200VA), 2A at 24Vdc (DC-13), and 5A at 230Vac (AC-15). Connection is facilitated through plug-in/detachable spring terminal connections. The supply voltage ranges from 19.2-264Vac, covering 24Vac, 110Vac, 120Vac, 220Vac, and 240Vac nominal values, and from 19.2-264Vdc, covering 24Vdc, 110Vdc, 120Vdc, 220Vdc, and 250Vdc nominal values. It falls under the PMD s10 sub-range, with dimensions of W45mm x D120mm, and offers an IP40 degree of protection. The housing is made of PC material, and it is suitable for both single-phase (1AC) and 3-phase (3AC) input networks, with a rated voltage of 100-550Vac/dc for measuring voltage. The net width is 45 mm, and it consumes 3 W of power. Operating modes include fault latching/non-latching, automatic/manual reset, and normally energized/de-energized modes. It can be stored in temperatures ranging from -25 to +85°C. The unit features 2 x auxiliary outputs (2CO changeover / 2xSPDT-NO/NC contacts; 0.1-5A 24Vdc 120W DC-1 or 240Vac 1200VA AC-1 resistive load), 1 x analog input for single-phase or 3-phase voltage measurement, and protection functions against overpower, overcurrent, and undercurrent. It also includes a link terminal and a measuring circuit for digital inputs, and 1 x analog output for voltage and current measurement.

Pilz

PILZ-890150 Part Image. Manufactured by Pilz.

PILZ-890150

Verified stock: 0

Pilz PILZ-890150 is a protection unit designed for true power monitoring with a relay that supports 9 different measuring ranges. It features adjustable switching for underload and overload thresholds, along with customizable monitoring reaction time and start-up suppression time. This unit is suitable for DIN rail mounting and operates within an ambient air temperature range of 0 to +55°C. It has a net height of 87 mm and is rated for an 18A measuring current. The safety output contacts ratings vary from 0.1A to 5A at 24Vdc (DC-1; 120W) and 240Vac (AC-1; 1200VA), to 0.1A-1.5A at 24Vdc (DC-13) and 0.1A-1.8A at 230Vac (AC-15). Connection is established via fixed screw terminal connections. The supply voltage can range from 27.5-264.5Vac for AC and 93.5-287.5Vdc for DC, covering nominal voltages of 110Vac/120Vac/220Vac/230Vac and 110Vdc/120Vdc/220Vdc/250Vdc respectively. The S1WP sub-range model has dimensions of W22.5mm, with a degree of protection rated at IP40. It can handle a frequency measuring range of 0-1kHz and is constructed with a PPO housing. This unit is designed for both single-phase (1AC) and 3-phase (3AC) input networks, with a rated voltage for AC measuring voltage up to 415Vac/dc. The net width and depth are 22.5 mm and 121 mm, respectively, with a power consumption of 5 VA. It is capable of storage in ambient air temperatures ranging from -40 to +85°C. The digital outputs include 1 x auxiliary output (SPDT-NO/NC contacts) suitable for resistive loads, and it features 1 x analog input for current measurement and 1 x analog input for voltage measurement. The protection functions include underpower and overpower monitoring, complemented by 1 x analog output for voltage and current monitoring.

Pilz

PILZ-890120 Part Image. Manufactured by Pilz.

PILZ-890120

Verified stock: 0

Pilz PILZ-890120 is a protection unit designed for true power monitoring with a relay that supports 9 different measuring ranges. It features adjustable switching for underload and overload thresholds, along with customizable monitoring reaction time and start-up suppression time. This unit is suitable for DIN rail mounting and operates within an ambient air temperature range of 0 to +55°C. It has a net height of 87 mm and is rated for an 18A measuring current. The safety output contacts ratings vary from 0.1A to 5A at 24Vdc (DC-1; 120W) and 240Vac (AC-1; 1200VA), with lower ratings for DC-13 and AC-15 applications. Connection is established via fixed screw terminal connections. The supply voltage can range from 27.5-264.5Vac for AC and 93.5-287.5Vdc for DC, covering standard nominal voltages. The S1WP sub-range model has dimensions of W22.5mm, a degree of protection of IP40, and operates within a frequency of 0-1kHz for its measuring range. Constructed with a PPO housing, it is designed for both single-phase (1AC) and 3-phase (3AC) input networks, with a rated voltage of 0-120Vac/dc for measuring voltage. The unit's net width and depth are 22.5 mm and 121 mm, respectively, and it has a power consumption of 5 VA. It can be stored in temperatures ranging from -40 to +85°C. The digital outputs include 1 x auxiliary output (SPDT-NO/NC contacts; 0.1-5A 24Vdc 120W DC-1 or 240Vac 1200VA AC-1 resistive load), and it features 1 x analog input for current measurement and 1 x analog input for voltage measurement. Protection functions include underpower and overpower monitoring, complemented by 1 x analog output for voltage and current monitoring.

Pilz

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo