​
Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

PILZ-773713 Pilz Logic Controllers & Displays

Pilz PILZ-773713 Pilz PILZ-773713 is a communications unit designed for expansion and communication tasks within automation systems. It features a CANopen fieldbus interface, supporting the CiA DS-301 V3.0 protocol for seamless integration as a peripheral device. The unit allows for station addresses ranging from 0 to 99d and is mounted using a DIN rail (35mmx7.5mm; horizontal). It operates within an ambient air temperature range of 0 to +60°C and has a net height of 94 mm. The design incorporates a 9-pin D-sub male connector for connections and falls under the communication module sub-range. With dimensions of W27mm x D119 mm and a net width of 22.5 mm, it offers an IP20 degree of protection. The supply voltage requirements are 20.4-28.8Vdc (24Vdc nom.) and 4.9-5.1Vdc (5Vdc nom.; module supply via base unit), with a power consumption of 1 W from the supply via the base unit. The material composition includes a PPO bottom housing and an ABS front housing. It has a rated voltage of 500Vac (test voltage; CANopen) and a rated insulation voltage (Ui) of 30 V. The communication speeds it supports range from 10kBit/s to 1MBit/s, with a time delay of 20ms for supply interruption before de-energization. The unit also features galvanic isolation for enhanced protection.
Pilz

Part#:PILZ-773713

Manufacturer:Pilz

Product Lifecycle:Active

Get a quick Quote!

Pilz PILZ-773713 is a communications unit designed for expansion and communication tasks within automation systems. It features a CANopen fieldbus interface, supporting the CiA DS-301 V3.0 protocol for seamless integration as a peripheral device. The unit allows for station addresses ranging from 0 to 99d and is mounted using a DIN rail (35mmx7.5mm; horizontal). It operates within an ambient air temperature range of 0 to +60°C and has a net height of 94 mm. The design incorporates a 9-pin D-sub male connector for connections and falls under the communication module sub-range. With dimensions of W27mm x D119 mm and a net width of 22.5 mm, it offers an IP20 degree of protection. The supply voltage requirements are 20.4-28.8Vdc (24Vdc nom.) and 4.9-5.1Vdc (5Vdc nom.; module supply via base unit), with a power consumption of 1 W from the supply via the base unit. The material composition includes a PPO bottom housing and an ABS front housing. It has a rated voltage of 500Vac (test voltage; CANopen) and a rated insulation voltage (Ui) of 30 V. The communication speeds it supports range from 10kBit/s to 1MBit/s, with a time delay of 20ms for supply interruption before de-energization. The unit also features galvanic isolation for enhanced protection.

About the manufacturer: Pilz is one of the manufacturers that offers Logic Controllers & Displays that you can order at Quotebeam.com. We are at the forefront of driving the evolution of industrial automation. Our company ethos is built on dedication and principles, placing a high priority on safety. Over the years, we have been devoted to creating cutting-edge products and solutions tailored to our customers' requirements.

Check out the PILZ-773713 Pilz price in the box on the right side or send a quick quote.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

PILZ-773713 Description

Pilz PILZ-773713 is a communications unit designed for expansion and communication tasks within automation systems. It features a CANopen fieldbus interface, supporting the CiA DS-301 V3.0 protocol for seamless integration as a peripheral device. The unit allows for station addresses ranging from 0 to 99d and is mounted using a DIN rail (35mmx7.5mm; horizontal). It operates within an ambient air temperature range of 0 to +60°C and has a net height of 94 mm. The design incorporates a 9-pin D-sub male connector for connections and falls under the communication module sub-range. With dimensions of W27mm x D119 mm and a net width of 22.5 mm, it offers an IP20 degree of protection. The supply voltage requirements are 20.4-28.8Vdc (24Vdc nom.) and 4.9-5.1Vdc (5Vdc nom.; module supply via base unit), with a power consumption of 1 W from the supply via the base unit. The material composition includes a PPO bottom housing and an ABS front housing. It has a rated voltage of 500Vac (test voltage; CANopen) and a rated insulation voltage (Ui) of 30 V. The communication speeds it supports range from 10kBit/s to 1MBit/s, with a time delay of 20ms for supply interruption before de-energization. The unit also features galvanic isolation for enhanced protection.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Pilz

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Pilz Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pilz Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pilz, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

PILZ-890170 Part Image. Manufactured by Pilz.

PILZ-890170

Verified stock: 0

Pilz PILZ-890170 is a protection unit designed for DIN rail mounting, featuring a phase sequence monitoring relay. It operates within an ambient air temperature range of -15 to +55°C and has a net height of 87 mm. The unit offers fixed screw terminal connections and requires a supply voltage of 200Vac-240Vac (220Vac / 230Vac nominal) within the S1PN sub-range. With dimensions of W22.5mm x D121mm and a net width of 22.5 mm, it is encased in a PPO housing that provides an IP40 degree of protection. Designed for a 3-phase (3AC) input network with a rated voltage of 200-240Vac, it consumes 8 VA of power. The operating mode is normally energized, and it includes 2 x auxiliary outputs (2CO changeover / 2xSPDT-NO/NC contacts) for digital outputs and 1 x analog input for L1-L3 voltage measurement. Its protection functions include phase sequence and phase failure.

Pilz

PILZ-760100 Part Image. Manufactured by Pilz.

PILZ-760100

Verified stock: 0

Pilz PILZ-760100 is a protection unit designed for true power monitoring and measurement, with limit values that can be adjusted via a display and stored on a chip card. It supports DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. The unit has a net height of 100 mm and accommodates a rated current of 1A-12A for measuring, with safety output contacts ratings of 0.1A-5A at 24Vdc (DC-1; 120W), 0.1A-5A at 240Vac (AC-1; 1200VA), 2A at 24Vdc (DC-13), and 5A at 230Vac (AC-15). Connection is facilitated through plug-in/detachable spring terminal connections. The supply voltage ranges from 19.2-264Vac, covering 24Vac, 110Vac, 120Vac, 220Vac, and 240Vac nominal values, and from 19.2-264Vdc, covering 24Vdc, 110Vdc, 120Vdc, 220Vdc, and 250Vdc nominal values. It falls under the PMD s10 sub-range, with dimensions of W45mm x D120mm, and offers an IP40 degree of protection. The housing is made of PC material, and it is suitable for both single-phase (1AC) and 3-phase (3AC) input networks, with a rated voltage of 100-550Vac/dc for measuring voltage. The net width is 45 mm, and it consumes 3 W of power. Operating modes include fault latching/non-latching, automatic/manual reset, and normally energized/de-energized modes. It can be stored in temperatures ranging from -25 to +85°C. The unit features 2 x auxiliary outputs (2CO changeover / 2xSPDT-NO/NC contacts; 0.1-5A 24Vdc 120W DC-1 or 240Vac 1200VA AC-1 resistive load), 1 x analog input for single-phase or 3-phase voltage measurement, and protection functions against overpower, overcurrent, and undercurrent. It also includes a link terminal and a measuring circuit for digital inputs, and 1 x analog output for voltage and current measurement.

Pilz

PILZ-890150 Part Image. Manufactured by Pilz.

PILZ-890150

Verified stock: 0

Pilz PILZ-890150 is a protection unit designed for true power monitoring with a relay that supports 9 different measuring ranges. It features adjustable switching for underload and overload thresholds, along with customizable monitoring reaction time and start-up suppression time. This unit is suitable for DIN rail mounting and operates within an ambient air temperature range of 0 to +55°C. It has a net height of 87 mm and is rated for an 18A measuring current. The safety output contacts ratings vary from 0.1A to 5A at 24Vdc (DC-1; 120W) and 240Vac (AC-1; 1200VA), to 0.1A-1.5A at 24Vdc (DC-13) and 0.1A-1.8A at 230Vac (AC-15). Connection is established via fixed screw terminal connections. The supply voltage can range from 27.5-264.5Vac for AC and 93.5-287.5Vdc for DC, covering nominal voltages of 110Vac/120Vac/220Vac/230Vac and 110Vdc/120Vdc/220Vdc/250Vdc respectively. The S1WP sub-range model has dimensions of W22.5mm, with a degree of protection rated at IP40. It can handle a frequency measuring range of 0-1kHz and is constructed with a PPO housing. This unit is designed for both single-phase (1AC) and 3-phase (3AC) input networks, with a rated voltage for AC measuring voltage up to 415Vac/dc. The net width and depth are 22.5 mm and 121 mm, respectively, with a power consumption of 5 VA. It is capable of storage in ambient air temperatures ranging from -40 to +85°C. The digital outputs include 1 x auxiliary output (SPDT-NO/NC contacts) suitable for resistive loads, and it features 1 x analog input for current measurement and 1 x analog input for voltage measurement. The protection functions include underpower and overpower monitoring, complemented by 1 x analog output for voltage and current monitoring.

Pilz

PILZ-890120 Part Image. Manufactured by Pilz.

PILZ-890120

Verified stock: 0

Pilz PILZ-890120 is a protection unit designed for true power monitoring with a relay that supports 9 different measuring ranges. It features adjustable switching for underload and overload thresholds, along with customizable monitoring reaction time and start-up suppression time. This unit is suitable for DIN rail mounting and operates within an ambient air temperature range of 0 to +55°C. It has a net height of 87 mm and is rated for an 18A measuring current. The safety output contacts ratings vary from 0.1A to 5A at 24Vdc (DC-1; 120W) and 240Vac (AC-1; 1200VA), with lower ratings for DC-13 and AC-15 applications. Connection is established via fixed screw terminal connections. The supply voltage can range from 27.5-264.5Vac for AC and 93.5-287.5Vdc for DC, covering standard nominal voltages. The S1WP sub-range model has dimensions of W22.5mm, a degree of protection of IP40, and operates within a frequency of 0-1kHz for its measuring range. Constructed with a PPO housing, it is designed for both single-phase (1AC) and 3-phase (3AC) input networks, with a rated voltage of 0-120Vac/dc for measuring voltage. The unit's net width and depth are 22.5 mm and 121 mm, respectively, and it has a power consumption of 5 VA. It can be stored in temperatures ranging from -40 to +85°C. The digital outputs include 1 x auxiliary output (SPDT-NO/NC contacts; 0.1-5A 24Vdc 120W DC-1 or 240Vac 1200VA AC-1 resistive load), and it features 1 x analog input for current measurement and 1 x analog input for voltage measurement. Protection functions include underpower and overpower monitoring, complemented by 1 x analog output for voltage and current monitoring.

Pilz

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo