Inductive Sensors

NI3-M08K-AP6X

Inductive Sensor, With Increased Switching Distance, Rated switching distance 3 mm, Cable length (L) 2 m, Non-flush, Threaded barrel, M8 x 1, Nickel-plated brass, Large sensing range, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck

BI3U-EM08-AP6X

Inductive Sensor, Rated switching distance 3 mm, Cable length (L) 2 m, Flush, Threaded barrel, M8 x 1, Stainless steel, 1.4427 SO, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Large switching distance, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck

BI2-G12-Y1X

Inductive Sensor, Rated switching distance 2 mm, Cable length (L) 2 m, Flush, Threaded barrel, M12 x 1, Chrome-plated brass, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), Cable connection, ATEX category II 1 G, Ex zone 0, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1

Turck

BI5-G18K-AP6X

Inductive Sensor, Rated switching distance 5 mm, Cable length (L) 2 m, Flush, M18 × 1 threaded barrel, Chrome-plated brass, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck

BI5-S18-AP6X

Inductive Sensor, Rated switching distance 5 mm, Cable length (L) 2 m, Flush, Threaded barrel, M18 x 1, Plastic, PA12‐GF30, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck

BI5-Q08-AP6X2-V1131

Inductive Sensor, Rated switching distance 5 mm, Flush, Rectangular, height 8 mm, Active face on top, Metal, Zamak, nickel-plated, DC 3-wire, 10…30 VDC, NO contact, PNP output, Male connector M8 × 1/Ø 8 mm

Turck

BI2U-EG08-AN6X-V1131

Inductive Sensor, With Extended Switching Distance, Rated switching distance 2 mm, Flush, Threaded barrel, M8 x 1, Stainless steel, 1.4427 SO, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Large switching distance, High switching frequency, Recessed mountable, DC 3-wire, 10…30 VDC, NO contact, NPN output, M8 x 1 male connector

Turck

BI2U-EG08-AP6X

Inductive Sensor, With Extended Switching Distance, Rated switching distance 2 mm, Cable length (L) 2 m, Flush, Threaded barrel, M8 x 1, Stainless steel, 1.4427 SO, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Large switching distance, High switching frequency, Recessed mountable, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck

BI1.5-EH04-0.3-M12-SIU-H1141

Inductive Sensor, With Analog Output, Measuring range 0.1 mm, Max. measuring range 1.5 mm, Cable length (L) 0.3 m, Flush, Smooth barrel, Ø 4 mm, Stainless steel, 1.4427, 4-wire, 15…30 VDC, Analog output, 0…10 V and 0…20 mA, Cable with connector, M12 × 1

Turck

BI2-Q10S-AP6X

Inductive Sensor, Rated switching distance 2 mm, Cable length (L) 2 m, Flush, Rectangular, height 10.2 mm, Active face, lateral, Cable outlet to all sides, Plastic, PP-GF20, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck

BI2-M12-AP6X

Inductive Sensor, Rated switching distance 2 mm, Cable length (L) 2 m, Flush, M12 × 1 threaded barrel, Chrome-plated brass, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck

BI4U-M12-AN6X

Inductive Sensor, With Extended Switching Distance, Rated switching distance 4 mm, Cable length (L) 2 m, Flush, M12 × 1 threaded barrel, Chrome-plated brass, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Large switching distance, Recessed mountable, DC 3-wire, 10…30 VDC, NO contact, NPN output, Cable connection

Turck

BI15-EM30-AP45XLD-H1141

Inductive Sensor, For Use in Vehicle Board Nets, Rated switching distance 15 mm, Flush, M30 × 1.5 threaded tube, Stainless steel, 1.4301, For vehicle board nets, 12 V and 24 V, Increased interference immunity 100 V/m radiated acc. ISO 11452-4 and 100 mA BCI acc. to ISO 11452-2, Load-dump protection acc. to DIN ISO 7637-2 (SAE J 113-11), Extended temperature range, High protection class IP68/IP69K, Protection against salt spray and rapid temperature change, Laser engraved label, permanently legib

Turck

NI8U-M12-RP6X-H1143

Inductive Sensor, Rated switching distance 8 mm, Non-flush, M12 × 1 threaded barrel, Chrome-plated brass, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Extended temperature range, High switching frequency, DC 3-wire, 10…30 VDC, NC contact, PNP output, M12 x 1 male connector

Turck

NI8U-MT12-AP6X2-H1141

Inductive Sensor, Rated switching distance 8 mm, Non-flush, Threaded barrel, M12 x 1, Brass, PTFE-coated, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Extended temperature range, High switching frequency, DC 3-wire, 10…30 VDC, NO contact, PNP output, M12 x 1 male connector

Turck

BI5U-EM18-AN6X-H1141

Inductive Sensor, Rated switching distance 5 mm, Flush, Threaded barrel, M18 x 1, Stainless steel, 1.4301, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Extended temperature range, High switching frequency, DC 3-wire, 10…30 VDC, NO contact, NPN output, M12 x 1 male connector

Turck

NI35-CP40-VP4X2/S10

Inductive Sensor, Rated switching distance 35 mm, Non-flush, Rectangular, height 40 mm, Variable orientation of active face in 9 directions, Plastic, PBT‐GF30‐V0, High luminance corner LEDs, Optimum view on supply voltage and switching state from any position, DC 4-wire, 10…65 VDC, Changeover contact, PNP output, Terminal chamber

Turck

BI10-EG30F-AG6X-H1141

Inductive Sensor, Stainless Steel Front, Rated switching distance 10 mm, Flush, Threaded barrel, M30 x 1.5, Stainless steel, 1.4305, DC 2-wire, 10…30 VDC, Polarized version, NO contact, M12 x 1 male connector

Turck

BI15U-CK40-ADZ30X2-B1131/S949

Inductive Sensor, Rated switching distance 15 mm, Flush, Rectangular, height 40 mm, Variable orientation of active face in 5 directions, Plastic, PBT‐GF30‐V0, Male connector, stainless steel A2 1.4301 (AISI 304), Only use the included plastic clip BS4-CK40, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Extended temperature range, High switching frequency, AC 2-wire, 20…250 VAC, DC 2-wire, 10…300 VDC, NO contact, 7/8" male connector

Turck

BI4-M12-AN6X

Inductive Sensor, With Increased Switching Distance, Rated switching distance 4 mm, Cable length (L) 2 m, Flush, M12 × 1 threaded barrel, Chrome-plated brass, Large sensing range, DC 3-wire, 10…30 VDC, NO contact, NPN output, Cable connection

Turck