3249088 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Rated surge voltage
  8 kV
• Maximum load current
  30 A (with 4 mm² conductor cross section)
• Nominal cross section
  2.5 mm²
• Degree of pollution
  3
• Potentials
  1
• Insulating material
  PA
• Overvoltage category
  III
• Number of levels
  1
• Color
  gray
• Maximum power dissipation for nominal condition
  0.77 W
• Nominal current IN
  24 A
• Back of the hand protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Result of voltage-drop test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Oscillation, broadband noise test result
  Test passed
• ASD level
  0.02 g²/Hz
• Shock duration
  30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
22 mm
Connection method
Spring-cage connection
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
28
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Flammability rating according to UL 94
V0
Insulating material group
I
Open side panel
Yes
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Conductor cross section short circuit testing
4 mm²
Short-time current
0.48 kA
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Height NS 35/15
39.5 mm
Conductor cross section solid min.
0.08 mm²
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ECLASS 7.0
27141120
ETIM 4.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Nominal voltage UN
800 V
Result of power-frequency withstand voltage test
Test passed
Tight fit on carrier
NS 35
Setpoint
1 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
42.7 mm
Connection
1 level
Connection in acc. with standard
CSA
Conductor cross section solid max.
4 mm²
Conductor cross section AWG min.
28
Max. AWG conductor cross section, flexible
14
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 3.0
EC000902
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
2 kV
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Acceleration
5g
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
End cover width
4 mm
Height NS 35/7,5
32 mm
Stripping length
8 mm
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
ECLASS 11.0
27141120
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 2.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410