3249059 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Flammability rating according to UL 94
  V0
• Nominal current IN
  24 A
• Result of power-frequency withstand voltage test
  Test passed
• Tensile test result
  Test passed
• Result of thermal test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  30 ms
• Static insulating material application in cold
  -60 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Stripping length
  8 mm
• Number of levels
  1
• Degree of pollution
  3
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of flexion and pull-out test
  Test passed
• Result of voltage-drop test
  Test passed
• Result of aging test
  Test passed
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
0.02 g²/Hz
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
4 mm
Connection in acc. with standard
CSA
Conductor cross section AWG min.
28
Min. AWG conductor cross section, flexible
28
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Nominal cross section
2.5 mm²
Rated surge voltage
8 kV
Maximum load current
30 A (with 4 mm² conductor cross section)
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Max. AWG conductor cross section, flexible
14
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 6.0
EC000897
UNSPSC 13.2
31162903
Number of connections
2
Insulating material
PA
Overvoltage category
III
Insulating material group
I
Nominal voltage UN
800 V
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Result of temperature-rise test
Test passed
Short-time current
0.48 kA
Conductor cross section short circuit testing
4 mm²
Test spectrum
Service life test category 1, class B, body mounted
Acceleration
5g
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
32 mm
Conductor cross section solid max.
4 mm²
Conductor cross section solid min.
0.08 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ETIM 3.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
Maximum power dissipation for nominal condition
0.77 W
Open side panel
Yes
Finger protection
guaranteed
Bending test turns
135
Bending test rotation speed
10 rpm
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
5.2 mm
Height
22 mm
Connection
1 level
Conductor cross section AWG max.
12
Conductor cross section flexible max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000902
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Connection method
Spring-cage connection
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 7.0
27141190
ETIM 2.0
EC000902
UNSPSC 11
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410