3249224 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Overvoltage category
  III
• Open side panel
  Yes
• Back of the hand protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Result of voltage-drop test
  Test passed
• Short-time current
  0.48 kA
• Color
  blue
• Rated surge voltage
  8 kV
• Nominal current IN
  24 A
• Power frequency withstand voltage setpoint
  2 kV
• Bending test rotation speed
  10 (+/- 2) rpm
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Result of thermal test
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
Number of levels
1
Insulating material
PA
Maximum load current
30 A (with 4 mm² conductor cross section)
Nominal voltage UN
800 V
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
32 mm
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ETIM 4.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Potentials
2
Maximum power dissipation for nominal condition
0.77 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
9.6 kV
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Tractive force setpoint
60 N
Tight fit on carrier
NS 32/NS 35
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
10.4 mm
Height
22 mm
Connection
1 level
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
28
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 3.0
EC000902
UNSPSC 13.2
39121410
Number of connections
4
Flammability rating according to UL 94
V0
Degree of pollution
3
Insulating material group
I
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Conductor cross section tensile test
4 mm²
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Conductor cross section short circuit testing
4 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
42.7 mm
Connection method
Spring-cage connection
Connection in acc. with standard
CSA
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ETIM 2.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
4 mm
Conductor cross section solid min.
0.08 mm²
Max. AWG conductor cross section, flexible
14
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
39.5 mm
Stripping length
8 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.0
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410