3249062 Phoenix Contact Terminal Blocks

Product Details

• Insulating material
  PA
• Insulating material group
  I
• Maximum power dissipation for nominal condition
  0.77 W
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  2 kV
• Result of temperature-rise test
  Test passed
• Short-time current
  0.48 kA
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  30 ms
• Number of shocks per direction
  3
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height
  22 mm
• Connection in acc. with standard
  CSA
• Conductor cross section AWG min.
  28
• Min. AWG conductor cross section, flexible
  28
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Number of connections
2
Degree of pollution
3
Nominal voltage UN
800 V
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 1, class B, body mounted
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
4 mm
Stripping length
8 mm
Conductor cross section flexible max.
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Nominal cross section
2.5 mm²
Rated surge voltage
8 kV
Nominal current IN
24 A
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
ASD level
0.02 g²/Hz
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection
1 level
Conductor cross section solid min.
0.08 mm²
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ECLASS 9.0
27141120
ETIM 2.0
EC000902
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Number of levels
1
Flammability rating according to UL 94
V0
Maximum load current
30 A (with 4 mm² conductor cross section)
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Conductor cross section short circuit testing
4 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Spring-cage connection
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ETIM 3.0
EC000902
UNSPSC 11
39121410
Color
gray
Overvoltage category
III
Back of the hand protection
guaranteed
Note regarding shock protection
In the assembly in connection with the mini terminal blocks for NS 15 or NS 35 assembly, maximum 4 mini middle terminal blocks shall be installed between them.
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
5.2 mm
Length
32 mm
Conductor cross section AWG max.
12
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 7.0
27141120
ETIM 4.0
EC000902
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410