3247975 Phoenix Contact Terminal Blocks
Part#:3247975
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Bolt connection terminal block, nom. voltage: 1500 V, nominal current: 192 A, connection method: Bolt connection, number of connections: 2, number of positions: 1, width: 29 mm, height: 66 mm, color: black/yellow, mounting type: NS 35/7,5, NS 35/15, direc
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3247975 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Permissible humidity (storage/transport) 30 % ... 70 %
- Overvoltage category III
- Maximum load current 192 A (in case of a 70 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
- Note regarding shock protection Touch proofness is effective only if the ring cable lug is insulated with a shrink sleeve and does not extend beyond the cover.
- Result of tight fit on support Test passed
- Conductor cross section short circuit testing 70 mm²
- Oscillation, broadband noise test result Test passed
- Shock test result Test passed
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Height NS 35/15 74.5 mm
- Max. cross section for cable lug connection 6 mm²
- Cable lug width, max. 14 mm
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- ECLASS 10.0.1 27141120
- ECLASS 4.1 27141100
- ETIM 7.0 EC000897
- UNSPSC 18.0 39121410
- UNSPSC 21.0 39121410
- Number of positions 1
- Insulating material PA
- Degree of pollution 3
- Open side panel No
- Finger protection guaranteed
- Result of power-frequency withstand voltage test Test passed
- Setpoint 10 N
- Short circuit stability result Test passed
- Short-time current 8.4 kA
- Acceleration 5g
- Shock duration 30 ms
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Height NS 35/7,5 67 mm
- Cable lug connection according to standard DIN 46237:1970-07
- Hole diameter, min. 8.4 mm
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 5.1 27141100
- ETIM 3.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 13.2 39121410
- Number of connections 2
- Color black/yellow
- Rated surge voltage 8 kV
- Nominal voltage UN 1500 V
- Nominal current IN 192 A
- Power frequency withstand voltage setpoint 2.2 kV
- Result of thermal test Test passed
- Test frequency f1 = 5 Hz to f2 = 150 Hz
- Test duration per axis 5 h
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Width 29 mm
- Connection 1 level
- ECLASS 5.0 27141100
- ETIM 6.0 EC000897
- UNSPSC 12.01 39121410
- Result of voltage-drop test Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- ECLASS 4.0 27141100
- ECLASS 6.0 27141100
- ETIM 4.0 EC000897
- UNSPSC 7.0901 39121410
- Potentials 1
- Area of application Railway industry
- Maximum power dissipation for nominal condition 6.27 W
- Shock form Half-sine
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Height 66 mm
- Connection in acc. with standard UL
- Back of the hand protection guaranteed
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Result of temperature-rise test Test passed
- Test spectrum Service life test category 1, class B, body mounted
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Connection method Bolt connection
- Tightening torque, min 6 Nm
- Ambient temperature (assembly) -5 °C ... 70 °C
- ASD level 1.857 (m/s2)2/Hz
- Number of shocks per direction 3
- Surface flammability NFPA 130 (ASTM E 162) passed
- UNSPSC 19.0 39121410
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Length 184 mm
- Number of levels 1
- Nominal cross section 70 mm²
- Pitch 29 mm
- Stripping length The stripping length depends on the specification provided by the cable lug manufacturer.
- Bolt diameter 8 mm
- Flammability rating according to UL 94 V0
- Insulating material group I
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Result of surge voltage test Test passed
- Tight fit on carrier NS 35
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Tightening torque max 12 Nm
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 9.0 27141120
- ECLASS 7.0 27141120
- UNSPSC 6.01 30211811
- Screw thread M8
- Min. cross section for cable lug connection 2.5 mm²
- ECLASS 11.0 27141120
- UNSPSC 20.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
