3247419 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Insulating material
  PA
• Degree of pollution
  3
• Insulating material group
  I
• Power frequency withstand voltage setpoint
  3.82 kV
• Potentials
  1
• Maximum load current
  232 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of power-frequency withstand voltage test
  Test passed
• Requirements, voltage drop
  U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
• Conductor cross section short circuit testing
  95 mm²
• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Nominal voltage UN
  1500 V
• Result of surge voltage test
  Test passed
• Bending test conductor cross section/weight
  25 mm² / 4.5 kg
• Result of flexion and pull-out test
  Test passed
• Tight fit on carrier
  NS 32/NS 35
• Width
  25 mm
Connection in acc. with standard
IEC 60947-7-1
Stripping length
33 mm
Conductor cross section AWG max.
3/0
Conductor cross section flexible max.
95 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
35 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141100
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 6.01
30211811
Color
gray
Overvoltage category
III
Back of the hand protection
guaranteed
Open side panel
No
Tensile test result
Test passed
Result of tight fit on support
Test passed
Cross section with insertion bridge, solid max.
95 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
16 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 9.0
27141120
ECLASS 6.0
27141100
UNSPSC 18.0
39121410
Short circuit stability result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Tightening torque, min
15 Nm
Conductor cross section solid max.
95 mm²
Max. AWG conductor cross section, flexible
3/0
UNSPSC 19.0
39121410
Nominal current IN
232 A
Surge voltage test setpoint
14.8 kV
Tightening torque max
20 Nm
Conductor cross section flexible, with ferrule with plastic sleeve max.
95 mm²
2 conductors with same cross section, stranded max.
35 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 4.1
27141100
Nominal cross section
95 mm²
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
7.54 W
Min. AWG conductor cross section, flexible
2
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 3.0
EC000897
ETIM 7.0
EC000897
Bending test turns
135
Conductor cross section tensile test
95 mm²
Result of voltage-drop test
Test passed
Screw thread
M8
Conductor cross section solid min.
25 mm²
Conductor cross section flexible min.
35 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
95 mm²
2 conductors with same cross section, solid min.
25 mm²
2 conductors with same cross section, solid max.
35 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
35 mm²
ECLASS 10.0.1
27141120
UNSPSC 20.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
97.5 mm
Connection method
Screw connection
Conductor cross section AWG min.
4
Conductor cross section flexible, with ferrule without plastic sleeve min.
35 mm²
Cross section with insertion bridge, stranded max.
70 mm²
2 conductors with same cross section, stranded min.
25 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
Bending test rotation speed
10 rpm
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Result of thermal test
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
85.5 mm
Height NS 32
95 mm
Tractive force setpoint
351 N
Short-time current
11.4 kA
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
90 mm
UNSPSC 11
39121410
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3