3244559 Phoenix Contact Terminal Blocks
Part#:3244559
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 887
Apr 29, 2024
About the product: Sensor/actuator terminal block, Power terminal, nom. voltage: 250 V, nominal current: 20 A, connection method: Push-in connection, number of connections: 2, cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, width: 7 mm, color: orange, mounting type: NS 35/7,5
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3244559 Phoenix Contact price in the box on the right side or send a quick quote.
3244559 Product Details
- Number of connections 2
- Insulating material PA
- Rated surge voltage 4 kV
- Overvoltage category III
- Open side panel Yes
- Bending test turns 135
- Setpoint 1 N
- Conductor cross section short circuit testing 4 mm²
- Result of thermal test Test passed
- Test duration per axis 5 h
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- End cover width 2.2 mm
- Note Please observe the current carrying capacity of the DIN rails.
- Conductor cross section flexible min. 0.2 mm²
- Max. AWG conductor cross section, flexible 14
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.34 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 7.0 27141128
- ECLASS 6.0 27141100
- ETIM 6.0 EC000900
- UNSPSC 6.01 30211811
- UNSPSC 13.2 39121410
- Maximum load current 20 A
- Maximum power dissipation for nominal condition 0.77 W (the value is multiplied when connecting multiple levels)
- Finger protection guaranteed
- Result of power-frequency withstand voltage test Test passed
- Tensile test result Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Proof of thermal characteristics (needle flame) effective duration 10 s
- Oscillation, broadband noise test result Test passed
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Shock duration 18 ms
- Height NS 35/15 49 mm
- Conductor cross section AWG min. 24
- Conductor cross section AWG max. 12
- Min. AWG conductor cross section, flexible 24
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 0.5 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Ambient temperature (assembly) -5 °C ... 70 °C
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 4.0 27141100
- ECLASS 5.1 27141100
- ETIM 3.0 EC000897
- UNSPSC 12.01 39121410
- Nominal cross section 2.5 mm²
- Degree of pollution 3
- Nominal current IN 20 A
- Result of surge voltage test Test passed
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Result of flexion and pull-out test Test passed
- Tight fit on carrier NS 35
- Short-time current 0.36 kA
- Ageing test for screwless modular terminal block temperature cycles 192
- Test spectrum Service life test category 2, bogie-mounted
- Shock form Half-sine
- Width 7 mm
- Length 74.4 mm
- Conductor cross section solid min. 0.34 mm²
- Number of levels 2
- Flammability rating according to UL 94 V0
- Insulating material group I
- Back of the hand protection guaranteed
- Bending test rotation speed 10 rpm
- Result of tight fit on support Test passed
- Result of temperature-rise test Test passed
- Result of aging test Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Acceleration 30g
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Height NS 35/7,5 41.5 mm
- Connection in acc. with standard IEC 60947-7-1
- Conductor cross section flexible max. 2.5 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.34 mm²
- Internal cylindrical gage A3
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 10.0.1 27141128
- ECLASS 5.0 27141100
- ECLASS 9.0 27141128
- ETIM 7.0 EC000900
- UNSPSC 11 39121410
- UNSPSC 19.0 39121410
- UNSPSC 20.0 39121410
- Potentials 2
- Color orange
- Nominal voltage UN 250 V
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Power frequency withstand voltage setpoint 1.5 kV
- Bending test conductor cross section/weight 0.2 mm² / 0.2 kg
- Result of voltage-drop test Test passed
- Short circuit stability result Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- ASD level 6.12 (m/s2)2/Hz
- Shock test result Test passed
- Number of shocks per direction 3
- Static insulating material application in cold -60 °C
- Connection method Push-in connection
- Stripping length 8 mm ... 10 mm
- Conductor cross section solid max. 4 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
- Connection cross sections directly pluggable 0.34 mm² 4 mm²
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 11.0 27141128
- ECLASS 4.1 27141100
- ETIM 4.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 18.0 39121410
- UNSPSC 21.0 39121410
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
This item can ship within 24h!
1-year warranty
$4.82
3244559
Stock:
887
Select Qty:
$4.82
$4.82 each
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨