3244012 Phoenix Contact Terminal Blocks

3244012 Product Details

• ETIM 7.0
  EC000897
• ETIM 6.0
  EC000897
• UNSPSC 12.01
  39121410
• Color
  gray
• Result of temperature-rise test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Number of shocks per direction
  3
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height
  22 mm
• Conductor cross section solid min.
  0.08 mm²
• Conductor cross section flexible max.
  2.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Internal cylindrical gage
  A3
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 5.1
  27141100
• ETIM 3.0
  EC000897
• UNSPSC 18.0
  39121410
• End cover width
  4 mm
• Stripping length
  8 mm
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 9.0
27141120
Insulating material group
I
Nominal current IN
24 A
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 15
30 mm
Connection in acc. with standard
CSA
Conductor cross section flexible min.
0.08 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410
Rated surge voltage
8 kV
Maximum load current
30 A (with 4 mm² conductor cross section)
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Surge voltage test setpoint
9.6 kV
Bending test turns
135
Tight fit on carrier
NS 15
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test duration per axis
5 h
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
28
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 4.0
27141100
ETIM 2.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Nominal voltage UN
800 V
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Tractive force setpoint
60 N
Short circuit stability result
Test passed
Result of aging test
Test passed
Acceleration
30g
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
32 mm
Connection method
Spring-cage connection
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
5.2 mm
Connection
1 level
Conductor cross section solid max.
4 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 6.0
27141100
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Conductor cross section tensile test
4 mm²
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Short-time current
0.48 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Number of levels
1
Nominal cross section
2.5 mm²
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.77 W
Result of tight fit on support
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
UNSPSC 20.0
39121410
Insulating material
PA
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Number of connections
2
Finger protection
guaranteed
Result of voltage-drop test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Potentials
1
Power frequency withstand voltage setpoint
2 kV
Degree of pollution
3
UNSPSC 19.0
39121410

Product condition