3244148 Phoenix Contact Terminal Blocks

3244148 Product Details

• Conductor cross section flexible min.
  0.08 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.14 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Stripping length
  8 mm
• Conductor cross section AWG max.
  12
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Conductor cross section solid max.
  4 mm²
• Max. AWG conductor cross section, flexible
  14
• Connection
  1 level
• UNSPSC 12.01
  39121410
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  2.5 mm²
• ECLASS 4.1
  27141100
• ECLASS 7.0
  27141120
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 5.1
  27141100
• Internal cylindrical gage
  A3
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• UNSPSC 7.0901
  39121410
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 9.0
  27141141
ECLASS 11.0
27141141
ECLASS 6.0
27141100
ETIM 2.0
EC000902
ETIM 4.0
EC000902
UNSPSC 6.01
30211811
ETIM 7.0
EC000901
Height NS 35/15
39.5 mm
Connection in acc. with standard
CSA
Conductor cross section AWG min.
28
Min. AWG conductor cross section, flexible
28
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141141
ECLASS 5.0
27141100
ETIM 3.0
EC000902
ETIM 6.0
EC000901
Insulating material group
I
Back of the hand protection
guaranteed
Test spectrum
Service life test category 1, class B, body mounted
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Width
5.2 mm
Height NS 35/7,5
32 mm
Nominal cross section
2.5 mm²
Insulating material
PA
Open side panel
Yes
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Static insulating material application in cold
-60 °C
UNSPSC 19.0
39121410
Shock duration
30 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
22 mm
Connection method
Spring-cage connection
Flammability rating according to UL 94
V0
Overvoltage category
III
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
5g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Finger protection
guaranteed
ASD level
0.02 g²/Hz
Shock test result
Test passed
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
4 mm
UNSPSC 21.0
39121410
Number of connections
2
Rated surge voltage
8 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
42.7 mm
Note
Please observe the current carrying capacity of the DIN rails.
Conductor cross section solid min.
0.08 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
UNSPSC 20.0
39121410
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
UNSPSC 13.2
39121410
UNSPSC 11
39121410
Color
green-yellow
UNSPSC 18.0
39121410
Number of levels
1
Degree of pollution
3
Test directions
X-, Y- and Z-axis (pos. and neg.)

Product condition