3211797 Phoenix Contact Terminal Blocks

3211797 Product Details

• Conductor cross section flexible max.
  6 mm²
• ECLASS 5.0
  27141100
• UNSPSC 20.0
  39121410
• UNSPSC 19.0
  39121410
• ETIM 2.0
  EC000897
• UNSPSC 21.0
  39121410
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ETIM 7.0
  EC000897
• UNSPSC 7.0901
  39121410
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Nominal cross section
  4 mm²
• Rated surge voltage
  8 kV
• Maximum power dissipation for nominal condition
  1.02 W
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  2 kV
• Bending test rotation speed
  10 rpm
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Conductor cross section short circuit testing
  6 mm²
• Ageing test for screwless modular terminal block temperature cycles
  192
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of connections
4
Color
gray
Insulating material group
I
Nominal voltage UN
800 V
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Short circuit stability result
Test passed
Setpoint
1 N
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Potentials
1
Flammability rating according to UL 94
V0
Overvoltage category
III
Maximum load current
36 A (with 6 mm² conductor cross section, rigid)
Result of power-frequency withstand voltage test
Test passed
Finger protection
guaranteed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection
1 level
Insulating material
PA
Degree of pollution
3
Nominal current IN
32 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Open side panel
Yes
Bending test turns
135
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Short-time current
0.72 kA
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock test result
Test passed
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
End cover width
2.2 mm
Height NS 35/15
44 mm
Conductor cross section solid min.
0.5 mm²
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Number of levels
1
Area of application
Railway industry
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
6.2 mm
Height NS 35/7,5
36.5 mm
Conductor cross section AWG min.
24
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
ECLASS 4.0
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 11
39121410
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
24
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
UNSPSC 12.01
39121410
ECLASS 7.0
27141120
ETIM 6.0
EC000897
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 4.0
EC000897
Test directions
X-, Y- and Z-axis (pos. and neg.)
Length
77 mm
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Connection in acc. with standard
CSA
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Internal cylindrical gage
A4
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ETIM 3.0
EC000897
Height
35.3 mm

Product condition