2902014 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2902014
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Checking verified in-stock parts...
About the product: 3-way repeater power supply with plug-in connection technology. HART-transparent, input signal 0(4)...20 mA, output signal 0(4)...20 mA. The device can be used in both isolator and repeater power supply operation. Screw connection technology
About the manufacturer: Phoenix Contact develops and manufactures industrial electrical and electronic technology products that power, protect, connect and automate systems and equipment.
Check out the 2902014 Phoenix Contact price in the box on the right side or send a quick quote.
2902014 Product Details
- Width 6.2 mm
- Maximum altitude ≤ 2000 m
- Input resistance current input approx. 68 Ω (+0.7 V for test diode)
- Load/output load current output ≤ 600 Ω (at 20 mA)
- Transmission Behavior 1:1 to input signal
- Conductor cross section solid 0.2 mm² ... 1.5 mm² (with ferrule)
- No. of channels 1
- Limit frequency (3 dB) approx. 1.75 kHz
- Ripple < 20 mVPP (at 600 Ω)
- Power consumption ≤ 1400 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Maximum transmission error 0.05 % (of final value in repeater power supply operation)
- Torque 0.5 Nm ... 0.6 Nm
- ECLASS 6.0 27210100
- ECLASS 9.0 27210120
- UNSPSC 6.01 30211506
- UNSPSC 20.0 39121008
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- Height 109.81 mm
- Number of inputs 1
- Max. output current 24 mA
- Nominal supply voltage 24 V DC
- Stripping length 10 mm
- ECLASS 4.0 27210100
- ECLASS 7.0 27210120
- UNSPSC 7.0901 39121008
- UNSPSC 12.01 39121008
- Depth 119.2 mm
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Description of the input Current input (sensor circuit)
- Screw thread M3
- Transmitter supply voltage > 19.5 V
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- Maximum temperature coefficient 0.0075 %/K
- Overvoltage category II
- Output name Current output
- Typical current consumption 25 mA (at 24 V DC and in isolator operation)
- Color gray
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
- Certificate DNV GL TAA00002UA
- Noise emission EN 61000-6-4
- Electromagnetic compatibility Conformance with EMC directive
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- Designation Shipbuilding approval
- EMC A
- Rated insulation voltage 300 V (effective)
- Housing material PBT
- Temperature B
- Humidity B
- ECLASS 10.0.1 27210120
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
- Identification UL 508 Listed
- Vibration A
- Conductor cross section AWG 24 ... 12 (flexible)
- Standards/regulations EN 61000-4-6
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
- Ambient temperature (operation) -40 °C ... 70 °C
- Degree of protection IP20 (not assessed by UL)
- Current input signal 4 mA ... 20 mA (repeater power supply and isolator operation)
- Connection method Screw connection
- Temperature coefficient, typical 0.0075 %/K
- Protective circuit Transient protection
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 4.1 27210100
- ETIM 4.0 EC002653
- ETIM 7.0 EC002653
- UNSPSC 11 39121008
- Current output signal 4 mA ... 20 mA (repeater power supply and isolator operation)
- Degree of pollution 2
- ECLASS 11.0 27210120
- ECLASS 5.0 27210100
- UNSPSC 18.0 39121008
- UNSPSC 21.0 39121008
- Number of outputs 1
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- UNSPSC 13.2 39121008
- UNSPSC 19.0 39121008
- REACh SVHC Lead 7439-92-1
- ECLASS 5.1 27210100
- Step response (10-90%) < 200 µs (typ.)
- Mounting position any
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ETIM 6.0 EC002653
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
Shipping and Delivery Worldwide
calculate cost and time at Checkout
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨