3211019 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Nominal cross section
  2.5 mm²
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Nominal voltage UN
  500 V
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  18 ms
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height NS 35/7,5
  36.7 mm
• Connection method
  Push-in connection
• Conductor cross section AWG min.
  26
• Max. AWG conductor cross section, flexible
  16
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Color
gray
Rated surge voltage
6 kV
Maximum load current
24 A (with 4 mm² conductor cross section, rigid)
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Result of aging test
Test passed
Acceleration
30g
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
5.2 mm
Connection
1 level
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A2
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Potentials
1
Overvoltage category
III
Open side panel
Yes
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
26
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
Insulating material
PA
Degree of pollution
3
Maximum power dissipation for nominal condition
0.77 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Short-time current
0.3 kA
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
48.6 mm
Height NS 35/15
44.2 mm
Conductor cross section solid max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
Number of connections
4
Area of application
Machine building
Nominal current IN
17.5 A
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Setpoint
1 N
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
35.3 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410