3210600 Phoenix Contact Terminal Blocks
Part#:3210600
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Double-level terminal block, connection method: Push-in connection, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3210600 Phoenix Contact price in the box on the right side or send a quick quote.
3210600 Product Details
- Number of connections 6
- Flammability rating according to UL 94 V0
- Overvoltage category III
- Maximum load current 24 A (with 4 mm² conductor cross section, rigid)
- Back of the hand protection guaranteed
- Result of power-frequency withstand voltage test Test passed
- Nominal voltage UN 800 V
- Insulating material PA
- Maximum power dissipation for nominal condition 0.77 W (the value is multiplied when connecting multiple levels)
- Finger protection guaranteed
- Power frequency withstand voltage setpoint 2 kV
- Bending test conductor cross section/weight 0.14 mm² / 0.2 kg
- Result of tight fit on support Test passed
- Result of temperature-rise test Test passed
- Result of thermal test Test passed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Shock test result Test passed
- Relative insulation material temperature index (Elec.; UL 746 B) 130 °C
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Length 111.8 mm
- Connection method Push-in connection
- Conductor cross section AWG min. 26
- Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
- ECLASS 10.0.1 27141120
- UNSPSC 21.0 39121410
- Open side panel Yes
- Result of flexion and pull-out test Test passed
- Bending test turns 135
- Tractive force setpoint 60 N
- Conductor cross section short circuit testing 4 mm²
- Oscillation, broadband noise test result Test passed
- ASD level 6.12 (m/s2)2/Hz
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Number of shocks per direction 3
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Height 45.8 mm
- Height NS 35/15 62.5 mm
- Conductor cross section flexible max. 4 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
- ECLASS 11.0 27141120
- ECLASS 9.0 27141120
- UNSPSC 13.2 39121410
- Nominal cross section 2.5 mm²
- Insulating material group I
- Nominal current IN 20 A
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Surge voltage test setpoint 9.8 kV
- Conductor cross section tensile test 4 mm²
- Result of voltage-drop test Test passed
- Requirements, voltage drop ≤ 3.2 mV
- Result of aging test Test passed
- Acceleration 30g
- Shock form Half-sine
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- End cover width 2.2 mm
- Conductor cross section solid max. 4 mm²
- Conductor cross section AWG max. 12
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²
- Internal cylindrical gage A3
- Number of levels 2
- Color gray
- Rated surge voltage 8 kV
- Connection in acc. with standard IEC 60947-7-1
- Result of surge voltage test Test passed
- Checking the mechanical stability of terminal points (5 x conductor connection) Test passed
- Tensile test result Test passed
- Tight fit on carrier NS 35
- Short-time current 0.48 kA
- Ageing test for screwless modular terminal block temperature cycles 192
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Shock duration 18 ms
- Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Pitch 5.2 mm
- Conductor cross section solid min. 0.14 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 0.5 mm²
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 5.1 27141100
- ETIM 6.0 EC000897
- UNSPSC 20.0 39121410
- Bending test rotation speed 10 rpm
- Setpoint 1 N
- Short circuit stability result Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test spectrum Service life test category 2, bogie-mounted
- Test duration per axis 5 h
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Width 5.2 mm
- Height NS 35/7,5 55 mm
- Conductor cross section flexible min. 0.14 mm²
- Stripping length 8 mm ... 10 mm
- ECLASS 5.0 27141100
- ECLASS 7.0 27141120
- UNSPSC 19.0 39121410
- ECLASS 6.0 27141100
- ETIM 7.0 EC000897
- UNSPSC 18.0 39121410
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
3210600
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨