3209536 Phoenix Contact Terminal Blocks
Part#:3209536
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 4908
May 20, 2024
About the product: Ground modular terminal block, connection method: Push-in connection, number of connections: 2, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, height: 35.3 mm, color: green-yellow, mounting type: NS 35/7,5, NS 35/15
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3209536 Phoenix Contact price in the box on the right side or send a quick quote.
3209536 Product Details
- Flammability rating according to UL 94 V0
- Degree of pollution 3
- Open side panel Yes
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Static insulating material application in cold -60 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Number of connections 2
- Area of application Railway industry
- Back of the hand protection guaranteed
- Acceleration 30g
- Shock test result Test passed
- Shock duration 18 ms
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
- End cover width 2.2 mm
- Height NS 35/15 44 mm
- Stripping length 8 mm ... 10 mm
- Conductor cross section flexible min. 0.14 mm²
- Rated surge voltage 6 kV
- Insulating material group I
- Finger protection guaranteed
- ASD level 6.12 (m/s2)2/Hz
- Shock form Half-sine
- Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Height 35.3 mm
- Connection method Push-in connection
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 0.5 mm²
- Internal cylindrical gage A3
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 6.0 27141100
- ETIM 6.0 EC000901
- UNSPSC 21.0 39121410
- Color green-yellow
- Conductor cross section AWG min. 26
- Max. AWG conductor cross section, flexible 12
- Nominal cross section 2.5 mm²
- Overvoltage category III
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Number of levels 1
- Insulating material PA
- Maximum load current with 4 mm² conductor cross section, rigid
- Oscillation, broadband noise test result Test passed
- Test spectrum Service life test category 2, bogie-mounted
- Test duration per axis 5 h
- Number of shocks per direction 3
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Height NS 35/7,5 36.5 mm
- Connection 1 level
- Connection in acc. with standard CSA
- Conductor cross section AWG max. 12
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.34 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 11.0 27141141
- ECLASS 5.1 27141100
- Conductor cross section flexible max. 4 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- ECLASS 10.0.1 27141141
- ECLASS 7.0 27141141
- ETIM 3.0 EC000901
- UNSPSC 6.01 30211811
- UNSPSC 13.2 39121410
- UNSPSC 19.0 39121410
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Surface flammability NFPA 130 (ASTM E 162) passed
- Width 5.2 mm
- Length 48.5 mm
- Note Please observe the current carrying capacity of the DIN rails.
- Conductor cross section solid max. 4 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm²
- ECLASS 5.0 27141100
- ECLASS 9.0 27141141
- UNSPSC 12.01 39121410
- UNSPSC 20.0 39121410
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Conductor cross section solid min. 0.34 mm²
- Min. AWG conductor cross section, flexible 26
- Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ETIM 4.0 EC000901
- UNSPSC 7.0901 39121410
- UNSPSC 11 39121410
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.34 mm²
- Connection cross sections directly pluggable 0.34 mm² 4 mm²
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 4.0 27141100
- ECLASS 4.1 27141100
- ETIM 2.0 EC000901
- ETIM 7.0 EC000901
- UNSPSC 18.0 39121410
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
This item can ship within 24h!
1-year warranty
$6.55
3209536
Stock:
4908
Select Qty:
$6.55
$6.55 each
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨