3209530 Phoenix Contact Terminal Blocks

Product Details

• Nominal voltage UN
  500 V
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  1.31 W
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Insulating material
  PA
• Degree of pollution
  3
• Connection in acc. with standard
  IEC 60947-7-1
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Tensile test result
  Test passed
• Result of voltage-drop test
  Test passed
• Short circuit stability result
  Test passed
• Back of the hand protection
  guaranteed
• Number of connections
  2
• Insulating material group
  I
• Nominal current IN
  41 A
• Result of flexion and pull-out test
  Test passed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Setpoint
  1 N
Result of aging test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of levels
1
Nominal cross section
6 mm²
Rated surge voltage
8 kV
Maximum load current
41 A (with 10 mm² conductor cross section)
Open side panel
Yes
Surge voltage test setpoint
7.3 kV
Bending test turns
135
Tractive force setpoint
80 N
Result of temperature-rise test
Test passed
Color
gray
Overvoltage category
III
Connection method
Screw connection
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of thermal test
Test passed
Test duration per axis
5 h
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Result of tight fit on support
Test passed
Requirements, voltage drop
≤ 6,4 mV
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
8.2 mm
Disconnect element
M3 0.5 Nm 0.6 Nm
Min. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
73.9 mm
Stripping length
10 mm ... 12 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Tightening torque, min
1.5 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Shock form
Half-sine
Static insulating material application in cold
-60 °C
End cover width
2.2 mm
Conductor cross section solid min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A5
2 conductors with same cross section, solid min.
0.5 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ETIM 4.0
EC000902
ECLASS 9.0
27141126
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
55.5 mm
Conductor cross section flexible min.
0.5 mm²
Max. AWG conductor cross section, flexible
8
Connection cross sections directly pluggable
1 mm² 10 mm²
2 conductors with same cross section, solid max.
2.5 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Conductor cross section flexible, with TWIN ferrule min.
0.5 mm²
ECLASS 10.0.1
27141126
ECLASS 6.0
27141100
ECLASS 5.1
27141100
UNSPSC 18.0
39121410
REACh SVHC
Lead 7439-92-1
ECLASS 5.0
27141100
ETIM 6.0
EC000902
UNSPSC 19.0
39121410
2 conductors with same cross section, stranded min.
0.5 mm²
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Height NS 35/7,5
48 mm
Short-time current
0.72 kA
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Conductor cross section AWG min.
20
Conductor cross section AWG max.
6
Conductor cross section flexible, with TWIN ferrule max.
1.5 mm²
Screw thread
M4
ETIM 7.0
EC000902
UNSPSC 21.0
39121410
Tight fit on carrier
NS 35
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27141126
UNSPSC 13.2
39121410
Conductor cross section tensile test
10 mm²
Conductor cross section short circuit testing
6 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Tightening torque max
1.8 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
UNSPSC 20.0
39121410