3208964 Phoenix Contact Terminal Blocks

3208964 Product Details

• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Overvoltage category
  III
• Voltage LED
  24 V DC
• Fuse
  Type F (miniature)
• Nominal current IN
  10 A
• Static insulating material application in cold
  -60 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section flexible max.
  6 mm²
• Note
  The current is determined by the fuse used, the voltage by the selected LED.15 A for single arrangement, 10 A for group arrangement. Derating curve available on request. The recommended continuous load capacity of the fuse inserts according to DIN 72581/P
• Nominal cross section
  4 mm²
• Degree of pollution
  3
• Insulating material group
  I
• Nominal voltage UN
  24 V
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
Width
6.2 mm
End cover width
2.2 mm
Height
35.3 mm
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Connection in acc. with standard
CSA
ECLASS 11.0
27141116
ETIM 2.0
EC000897
ECLASS 5.1
27141100
UNSPSC 13.2
39121410
UNSPSC 12.01
39121410
Rated surge voltage
6 kV
Number of connections
2
Color
black
Maximum load current
15 A (with 6 mm² conductor cross section, rigid)
Current LED
2 mA
Open side panel
Yes
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
56 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
ECLASS 10.0.1
27141116
ECLASS 6.0
27141100
ETIM 3.0
EC000899
ETIM 6.0
EC000899
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Insulating material
PA
Maximum power dissipation for nominal condition
1.02 W
Maximum current with single arrangement
15 A
Fuse type
Flat
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Height NS 35/15
44 mm
Height NS 35/7,5
36.5 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Internal cylindrical gage
A4
ECLASS 5.0
27141100
ETIM 4.0
EC000899
UNSPSC 6.01
30211811
Ambient temperature (assembly)
-5 °C ... 70 °C
Conductor cross section AWG max.
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Stripping length
10 mm ... 12 mm
ECLASS 4.1
27141100
ECLASS 7.0
27141116
ETIM 7.0
EC000899
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Connection method
Push-in connection
ECLASS 4.0
27141100
ECLASS 9.0
27141116
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410

Product condition