3208100 Phoenix Contact Terminal Blocks

3208100 Product Details

• Number of levels
  1
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Connection method
  Push-in connection
• Conductor cross section solid min.
  0.25 mm²
• Conductor cross section AWG min.
  26
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ETIM 7.0
  EC000897
• End cover width
  2.2 mm
• Conductor cross section solid max.
  1.5 mm²
• Conductor cross section flexible min.
  0.14 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 10.0.1
  27141120
• ECLASS 7.0
  27141120
• ECLASS 5.0
  27141100
• ETIM 6.0
  EC000897
• Potentials
  1
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Width
  3.5 mm
• Height NS 35/15
  39.5 mm
Stripping length
8 mm ... 10 mm
Min. AWG conductor cross section, flexible
26
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 4.0
EC000897
UNSPSC 11
39121410
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 35/7,5
32 mm
Conductor cross section AWG max.
14
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
UNSPSC 6.01
30211811
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Connection
1 level
Connection in acc. with standard
CSA
ECLASS 11.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
UNSPSC 18.0
39121410
Oscillation, broadband noise test result
Test passed
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm²
UNSPSC 13.2
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Connection cross sections directly pluggable
0.25 mm² 1.5 mm²
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A1 / B1
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
UNSPSC 21.0
39121410
Nominal current IN
17.5 A
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Height
30.5 mm
Area of application
Railway industry
Nominal voltage UN
500 V
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.56 W
Power frequency withstand voltage setpoint
1.89 kV
Setpoint
1 N
Tight fit on carrier
NS 35
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.18 kA
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Rated surge voltage
6 kV
Maximum load current
17.5 A
Result of flexion and pull-out test
Test passed
Shock test result
Test passed
Number of shocks per direction
3
Insulating material group
I
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
1.5 mm²
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Number of connections
2
Tensile test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
ECLASS 4.1
27141100
ECLASS 5.1
27141100
Static insulating material application in cold
-60 °C
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Color
gray
Overvoltage category
III
ECLASS 6.0
27141100
Degree of pollution
3
Length
45 mm
ECLASS 4.0
27141100
Nominal cross section
1.5 mm²
Insulating material
PA
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg

Product condition