3208126 Phoenix Contact Terminal Blocks

Product Details

• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 7.0
  27141120
• Permissible humidity (storage/transport)
  30 % ... 70 %
• UNSPSC 11
  39121410
• UNSPSC 7.0901
  39121410
• Acceleration
  30g
• Result of tight fit on support
  Test passed
• Result of temperature-rise test
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of voltage-drop test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Result of aging test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• ASD level
  6.12 (m/s2)2/Hz
• ECLASS 5.1
  27141100
• UNSPSC 12.01
  39121410
• UNSPSC 19.0
  39121410
• Number of connections
  2
• Nominal cross section
  1.5 mm²
• Area of application
  Railway industry
Insulating material group
I
Nominal current IN
17.5 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Shock test result
Test passed
Shock duration
18 ms
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
ECLASS 10.0.1
27141120
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
UNSPSC 21.0
39121410
End cover width
2.2 mm
Width
3.5 mm
Connection
1 level
Conductor cross section solid min.
0.25 mm²
Connection in acc. with standard
CSA
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible max.
1.5 mm²
Connection cross sections directly pluggable
0.25 mm² 1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm²
Height NS 35/7,5
32 mm
Height
30.5 mm
Length
45 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 5.0
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000897
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 13.2
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Number of levels
1
Potentials
1
Nominal voltage UN
500 V
Result of power-frequency withstand voltage test
Test passed
Tight fit on carrier
NS 35
Short-time current
0.18 kA
Oscillation, broadband noise test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Height NS 35/15
39.5 mm
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Insulating material
PA
Rated surge voltage
6 kV
Maximum load current
17.5 A
Open side panel
Yes
Finger protection
guaranteed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Setpoint
1 N
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible min.
0.14 mm²
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Tensile test result
Test passed
Color
blue
Degree of pollution
3
Maximum power dissipation for nominal condition
0.56 W
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Conductor cross section short circuit testing
1.5 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Internal cylindrical gage
A1 / B1
Flammability rating according to UL 94
V0
Overvoltage category
III
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Connection method
Push-in connection
Max. AWG conductor cross section, flexible
14
ECLASS 9.0
27141120
ETIM 4.0
EC000897