3208951 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  4 mm²
• Number of connections
  2
• Maximum power dissipation for nominal condition
  1.02 W
• Overvoltage category
  III
• Maximum load current
  15 A (with 6 mm² conductor cross section, rigid)
• Current LED
  2 mA
• Fuse type
  Flat
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Width
  6.2 mm
• Note
  The current is determined by the fuse used, the voltage by the selected LED.15 A for single arrangement, 10 A for group arrangement. Derating curve available on request. The recommended continuous load capacity of the fuse inserts according to DIN 72581/P
• Insulating material
  PA
• Degree of pollution
  3
• Rated surge voltage
  6 kV
• Voltage LED
  12 V DC
• Fuse
  Type F (miniature)
• Nominal voltage UN
  12 V
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Number of levels
  1
Color
black
Flammability rating according to UL 94
V0
Insulating material group
I
Maximum current with single arrangement
15 A
Nominal current IN
10 A
Open side panel
Yes
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
56 mm
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Connection method
Push-in connection
Height
35.3 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
ECLASS 7.0
27141116
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
ECLASS 11.0
27141116
ECLASS 4.1
27141100
ECLASS 4.0
27141100
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
End cover width
2.2 mm
Conductor cross section solid max.
6 mm²
Internal cylindrical gage
A4
ECLASS 5.1
27141100
Height NS 35/15
44 mm
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section AWG max.
10
Connection in acc. with standard
CSA
ETIM 3.0
EC000899
ETIM 7.0
EC000899
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Height NS 35/7,5
36.5 mm
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
Stripping length
10 mm ... 12 mm
ECLASS 10.0.1
27141116
ECLASS 6.0
27141100
ECLASS 9.0
27141116
ETIM 6.0
EC000899
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
ECLASS 5.0
27141100
ETIM 4.0
EC000899
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
UNSPSC 18.0
39121410