3208786 Phoenix Contact Terminal Blocks

Product Details

• ETIM 7.0
  EC000901
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  2.5 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 11.0
  27141141
• Connection method
  Push-in connection
• Connection in acc. with standard
  IEC 60947-7-2
• Max. AWG conductor cross section, flexible
  6
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  16 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  4 mm²
• ETIM 4.0
  EC000901
• Note
  Please observe the current carrying capacity of the DIN rails.
• Conductor cross section solid max.
  25 mm²
• Min. AWG conductor cross section, flexible
  20
• ECLASS 9.0
  27141141
• UNSPSC 11
  39121410
• Conductor cross section flexible min.
  0.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  2.5 mm²
Height NS 35/7,5
52.6 mm
Conductor cross section solid min.
2.5 mm²
Conductor cross section AWG max.
4
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
ECLASS 6.0
27141100
Insulating material group
I
Oscillation, broadband noise test result
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Color
green-yellow
Insulating material
PA
Rated surge voltage
8 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test directions
X-, Y- and Z-axis (pos. and neg.)
Nominal cross section
16 mm²
Degree of pollution
3
Length
100.2 mm
Overvoltage category
III
Width
12.2 mm
Number of connections
3
Area of application
Railway industry
Back of the hand protection
guaranteed
Number of levels
1
Flammability rating according to UL 94
V0
Open side panel
Yes
Acceleration
30g
Number of shocks per direction
3
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Stripping length
18 mm
Connection
1 level
Conductor cross section AWG min.
20
Conductor cross section flexible max.
25 mm²
Internal cylindrical gage
A7
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
60.1 mm
Height
53.3 mm
UNSPSC 20.0
39121410
Finger protection
guaranteed
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
ETIM 3.0
EC000901
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Connection cross sections directly pluggable
2.5 mm² 25 mm²
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 6.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
ECLASS 10.0.1
27141141
ECLASS 5.0
27141100
ECLASS 7.0
27141141
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 12.01
39121410