3208511 Phoenix Contact Terminal Blocks

Product Details

• Short circuit stability result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Test duration per axis
  5 h
• Surge voltage test setpoint
  7.3 kV
• Short-time current
  0.18 kA
• Shock form
  Half-sine
• Static insulating material application in cold
  -60 °C
• Tight fit on carrier
  NS 35
• Result of thermal test
  Test passed
• Conductor cross section short circuit testing
  1.5 mm²
• Oscillation, broadband noise test result
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Shock duration
  18 ms
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Length
  65.4 mm
• Height NS 35/7,5
  42.6 mm
• Number of shocks per direction
  3
• End cover width
  2.2 mm
• Conductor cross section solid max.
  1.5 mm²
Test directions
X-, Y- and Z-axis (pos. and neg.)
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
3.5 mm
Conductor cross section AWG min.
26
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Number of connections
4
Nominal cross section
1.5 mm²
Insulating material
PA
Flammability rating according to UL 94
V0
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Nominal current IN
16 A
Finger protection
guaranteed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Area of application
Railway industry
Overvoltage category
III
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Shock test result
Test passed
Insulating material group
I
Maximum load current
16 A
Power frequency withstand voltage setpoint
1.89 kV
Tractive force setpoint
40 N
Result of voltage-drop test
Test passed
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Color
gray
Open side panel
Yes
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm² Using the AI-S 1-8 TQ ferrule, Order No. 1200293, is recommended
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Requirements, voltage drop
≤ 3.2 mV
Setpoint
1 N
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Internal cylindrical gage
A1 / B1
UNSPSC 21.0
39121410
Connection in acc. with standard
CSA
Tensile test result
Test passed
Conductor cross section tensile test
1.5 mm²
Nominal voltage UN
500 V
Result of surge voltage test
Test passed
Bending test turns
135
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
41.1 mm
Height NS 35/15
50.1 mm
Connection method
Push-in connection
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section AWG max.
14
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
1.5 mm²
Stripping length
8 mm ... 10 mm
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Result of power-frequency withstand voltage test
Test passed
Number of levels
2
Degree of pollution
3
Maximum power dissipation for nominal condition
0.56 W (the value is multiplied when connecting multiple levels)
Rated surge voltage
6 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11