3208760 Phoenix Contact Terminal Blocks

Product Details

• Connection in acc. with standard
  IEC 60947-7-1
• Conductor cross section flexible min.
  0.5 mm²
• Conductor cross section flexible max.
  25 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  16 mm²
• ETIM 6.0
  EC000897
• UNSPSC 12.01
  39121410
• UNSPSC 18.0
  39121410
• Height NS 35/7,5
  52.6 mm
• Connection cross sections directly pluggable
  2.5 mm² 25 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 6.0
  27141100
• ETIM 4.0
  EC000897
• UNSPSC 7.0901
  39121410
• UNSPSC 21.0
  39121410
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  16 mm²
• UNSPSC 20.0
  39121410
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• UNSPSC 11
  39121410
• UNSPSC 13.2
  39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
ECLASS 5.1
27141100
Conductor cross section solid min.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 7.0
27141120
Connection
1 level
ETIM 3.0
EC000897
ETIM 7.0
EC000897
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
ECLASS 11.0
27141120
Area of application
Railway industry
Maximum power dissipation for nominal condition
2.43 W
Potentials
1
Number of connections
3
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal cross section
16 mm²
Rated surge voltage
8 kV
Nominal current IN
76 A
Finger protection
guaranteed
Number of levels
1
Insulating material
PA
Degree of pollution
3
Length
100.2 mm
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Overvoltage category
III
Back of the hand protection
guaranteed
Nominal voltage UN
1000 V
Color
gray
Result of surge voltage test
Test passed
Tensile test result
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Stripping length
18 mm
Conductor cross section AWG max.
4
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
1.5 mm²
Maximum load current
85 A (with 25 mm² conductor cross section, rigid)
Open side panel
Yes
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Height NS 35/15
60.1 mm
Conductor cross section AWG min.
20
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Max. AWG conductor cross section, flexible
6
Conductor cross section flexible, with ferrule without plastic sleeve min.
2.5 mm²
Internal cylindrical gage
A7
ECLASS 5.0
27141100
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Short-time current
3 kA
Setpoint
5 N
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
12.2 mm
Power frequency withstand voltage setpoint
2.2 kV
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Height
53.3 mm
Conductor cross section solid max.
25 mm²
Min. AWG conductor cross section, flexible
20
ECLASS 10.0.1
27141120
ECLASS 4.0
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410