3208155 Phoenix Contact Terminal Blocks

3208155 Product Details

• Shock test result
  Test passed
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Width
  3.5 mm
• Height
  30.5 mm
• Connection method
  Push-in connection
• Conductor cross section flexible max.
  1.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.34 mm²
• Test duration per axis
  5 h
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Stripping length
  8 mm ... 10 mm
• Static insulating material application in cold
  -60 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Length
  54 mm
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• End cover width
  2.2 mm
• Connection in acc. with standard
  CSA
• Max. AWG conductor cross section, flexible
  14
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  1.5 mm²
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
32 mm
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Height NS 35/15
39.5 mm
Conductor cross section solid max.
1.5 mm²
Conductor cross section AWG max.
14
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section solid min.
0.25 mm²
Conductor cross section flexible min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Connection cross sections directly pluggable
0.25 mm² 1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Nominal voltage UN
500 V
Result of surge voltage test
Test passed
Potentials
1
Insulating material
PA
Maximum power dissipation for nominal condition
0.56 W
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Short-time current
0.18 kA
Number of connections
3
Overvoltage category
III
Degree of pollution
3
Open side panel
Yes
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
Acceleration
30g
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Nominal cross section
1.5 mm²
Rated surge voltage
6 kV
Maximum load current
17.5 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Number of levels
1
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
1.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Area of application
Railway industry
Insulating material group
I
Nominal current IN
17.5 A
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Color
gray
Bending test turns
135
Setpoint
1 N
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Connection
1 level
UNSPSC 19.0
39121410
Internal cylindrical gage
A1 / B1
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Flammability rating according to UL 94
V0
Number of shocks per direction
3
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm²

Product condition