3044199 Phoenix Contact Terminal Blocks

3044199 Product Details

• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  10 mm²
• ECLASS 4.0
  27141100
• ECLASS 9.0
  27141120
• ECLASS 5.1
  27141100
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 7.0
  27141120
• Internal cylindrical gage
  A7
• ECLASS 6.0
  27141100
• ETIM 2.0
  EC000897
• Potentials
  1
• Area of application
  Railway industry
• Nominal current IN
  76 A
• Back of the hand protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Bending test turns
  135
• Bending test conductor cross section/weight
  1.5 mm² / 0.4 kg
• Result of voltage-drop test
  Test passed
• Short-time current
  1.92 kA
• Number of levels
  1
• Insulating material
  PA
Maximum load current
101 A (with 25 mm² conductor cross section)
Open side panel
Yes
Surge voltage test setpoint
9.8 kV
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 32/NS 35
Shock protection test specification
IEC 60529:2001-02
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Nominal cross section
16 mm²
Overvoltage category
III
Maximum power dissipation for nominal condition
2.43 W
Ambient temperature (assembly)
-5 °C ... 70 °C
Number of connections
2
Flammability rating according to UL 94
V0
Degree of pollution
3
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Conductor cross section tensile test
25 mm²
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
16 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
55.5 mm
Tightening torque max
3 Nm
Conductor cross section flexible max.
25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
Result of temperature-rise test
Test passed
Color
gray
Rated surge voltage
8 kV
Insulating material group
I
Nominal voltage UN
1000 V
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Setpoint
5 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Acceleration
30g
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Conductor cross section flexible min.
1.5 mm²
ECLASS 10.0.1
27141120
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
12.2 mm
Height NS 35/7,5
55 mm
Height NS 35/15
62.5 mm
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock form
Half-sine
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Screw thread
M5
Stripping length
14 mm
Conductor cross section AWG min.
16
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
Conductor cross section solid max.
25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.75 mm²
2 conductors with same cross section, stranded max.
6 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
ECLASS 5.0
27141100
ETIM 3.0
EC000897
Result of thermal test
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
54.4 mm
Tightening torque, min
2.5 Nm
Connection in acc. with standard
CSA
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
2 conductors with same cross section, solid min.
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
ASD level
6.12 (m/s2)2/Hz
Surface flammability NFPA 130 (ASTM E 162)
passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Screw connection
Conductor cross section solid min.
1.5 mm²
Conductor cross section AWG max.
4
ECLASS 11.0
27141120
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Tractive force setpoint
135 N
Min. AWG conductor cross section, flexible
16
2 conductors with same cross section, solid max.
6 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
6 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
1 mm²
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Max. AWG conductor cross section, flexible
4
Ambient temperature (actuation)
-5 °C ... 70 °C
UNSPSC 12.01
39121410
UNSPSC 6.01
30211811
Proof of thermal characteristics (needle flame) effective duration
30 s
2 conductors with same cross section, stranded min.
1 mm²
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410

Product condition