3208139 Phoenix Contact Terminal Blocks

Product Details

• Height
  30.5 mm
• ECLASS 4.1
  27141100
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• Number of levels
  1
• Open side panel
  Yes
• Test spectrum
  Service life test category 2, bogie-mounted
• Test duration per axis
  5 h
• Static insulating material application in cold
  -60 °C
• Number of connections
  2
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
• Finger protection
  guaranteed
• ASD level
  6.12 (m/s2)2/Hz
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Length
  45 mm
• Height NS 35/15
  39.5 mm
• Connection cross sections directly pluggable
  0.25 mm² 1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 7.0
27141141
ECLASS 5.1
27141100
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Color
green-yellow
Insulating material group
I
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Shock duration
18 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/7,5
32 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section solid min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
ETIM 7.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 6.01
30211811
Insulating material
PA
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid max.
1.5 mm²
Min. AWG conductor cross section, flexible
26
Internal cylindrical gage
A1 / B1
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Nominal cross section
1.5 mm²
Rated surge voltage
6 kV
Back of the hand protection
guaranteed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection
1 level
UNSPSC 21.0
39121410
Stripping length
8 mm ... 10 mm
Conductor cross section flexible max.
1.5 mm²
Max. AWG conductor cross section, flexible
14
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.0
27141100
ECLASS 11.0
27141141
ECLASS 9.0
27141141
ETIM 3.0
EC000901
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
ECLASS 10.0.1
27141141
Note
Please observe the current carrying capacity of the DIN rails.
Area of application
Railway industry
Width
3.5 mm
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 6.0
EC000901
Conductor cross section AWG max.
14
ETIM 2.0
EC000901
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection in acc. with standard
CSA
ETIM 4.0
EC000901